Home

Mazdamanuals.com

DTC U212E:00 [PCM (SKYACTIV-D)]

id0102t5011700

Outline

System malfunction location

CAN communication: communication error to door-electrical supply unit (driver’s side)

Detection condition

•  Communication error between the PCM and door-electrical supply unit (driver's side) continues for 5 s or more.

Preconditions

―  The following conditions continue for 1.5 s:

―  Battery voltage: 10 V or more

―  Switch the ignition ON (engine off or on)

Fail-safe

•  Not applicable

Possible cause

•  CAN communication line malfunction between PCM and door-electrical supply unit (driver's side)

•  Body control module (BCM) malfunction

System wiring diagram

•  Not applicable

Connector diagram

•  Not applicable

System malfunction location	CAN communication: communication error to door-electrical supply unit (driver’s side)
Detection condition	• Communication error between the PCM and door-electrical supply unit (driver's side) continues for 5 s or more. Preconditions ― The following conditions continue for 1.5 s: ― Battery voltage: 10 V or more ― Switch the ignition ON (engine off or on)
Fail-safe	• Not applicable
Possible cause	• CAN communication line malfunction between PCM and door-electrical supply unit (driver's side) • Body control module (BCM) malfunction
System wiring diagram	• Not applicable
Connector diagram	• Not applicable

Diagnostic Procedure

• Inspect according to the diagnostic procedure in ON-BOARD DIAGNOSTIC [MULTIPLEX COMMUNICATION SYSTEM]. (See CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW [(E)].)