Mazdamanuals.com

ENGINE COOLANT LEAKAGE INSPECTION [SKYACTIV-X 2.0]

Home  id0112hf800500

Warning

•  A hot engine can cause severe burns. Turn off the engine and wait until it is cool before removing the exhaust system.

•  If the cooling system cap is removed when the engine is hot, steam and boiling water may be ejected, causing severe burns or severe injury. Perform the removal of the cooling system cap when the engine is cool.

•  When removing the cooling system cap, cover the cooling system cap with a rag and remove it slowly.

1.  Remove the cooling system cap.

2.  Install the radiator cap tester to the filling port.

ampjjw00003132

3.  Apply pressure using the radiator cap tester.

4.  When pressurizing the radiator, verify that the pressure is maintained.

•  If the pressure decreases, repair or replace the location where water is leaking because water leakage can be considered.