Mazdamanuals.com

CAMSHAFT POSITION (CMP) SENSOR REMOVAL/INSTALLATION [SKYACTIV-X 2.0]

Home  id0140hf110200

Replacement part

Oil and chemical type

Caution

•  When replacing the CMP sensor, make sure that there is no foreign matter on it such as metal shavings. If it is assembled with foreign matter on it, the sensor output signal will malfunction resulting from fluctuation in magnetic flux and cause a deterioration in engine control.

Intake Camshaft Position Sensor

1.  Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(E)].)

2.  Open the engine cover. (See ENGINE COVER OPEN/CLOSE [SKYACTIV-X 2.0].)

3.  Disconnect the intake camshaft position sensor connector.

4.  Remove the intake camshaft position sensor.

am3zzw00034999

5.  Install in the reverse order of removal.

Exhaust Camshaft Position Sensor

1.  Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(E)].)

2.  Open the engine cover. (See ENGINE COVER OPEN/CLOSE [SKYACTIV-X 2.0].)

3.  Disconnect the exhaust camshaft position sensor connector.

4.  Remove the exhaust camshaft position sensor.

am3zzw00035000

5.  Install in the reverse order of removal.