Home

Mazdamanuals.com

MASS AIR FLOW (MAF) SENSOR/INTAKE AIR TEMPERATURE (IAT) SENSOR NO.1 REMOVAL/INSTALLATION [SKYACTIV-X 2.0]

MASS AIR FLOW (MAF) SENSOR/INTAKE AIR TEMPERATURE (IAT) SENSOR NO.1 REMOVAL/INSTALLATION [SKYACTIV-X 2.0]

 id0140hf900300

Note
•  IAT sensor No.1 is built into the MAF sensor. When replacing IAT sensor No.1, replace MAF sensor/IAT sensor No.1.

1.  Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(E)].)

2.  Disconnect the MAF/IAT sensor No.1 connector.

am3zzw00035021

3.  Remove the MAF sensor/IAT sensor No.1.

am3zzw00035022

4.  Install in the reverse order of removal.