Home

Mazdamanuals.com

REAR WHEEL ALIGNMENT [(E)]

REAR WHEEL ALIGNMENT [(E)]

 id0211008003x2

Rear wheel alignment (Unloaded)*1 [2WD] (Except Chinese specs.)

Item

Fuel gauge indication

Empty

1/4

1/2

3/4

Full
Total toe-in
Tire
[Tolerance ±5 {0.20}]
(mm {in})
4.8 {0.19}
Rim inner
[Tolerance
16 inch wheel: ±2.9 {0.12}
18 inch wheel: ±3.3 {0.13}]
Vehicle equipped with 16 inch wheel: 2.8 {0.11}
Vehicle equipped with 18 inch wheel: 3.2 {0.13}
(degree)
0°24′±0°25′
Camber angle*2 (Reference value)
[Tolerance ±1°]
-1°27′
-1°27′
-1°28′
-1°28′
-1°29′
Thrust angle (Reference value) [Tolerance ±0°48′]
0°00′

*1  :Engine coolant and engine oil are at specified level. Spare tire, jack and tools are in designated position.
*2  :Difference between left and right must not exceed 1°00′.

Rear wheel alignment (Unloaded)*1 [AWD] (Except Chinese specs.)

Item

Fuel gauge indication

Empty

1/4

1/2

3/4

Full
Total toe-in
Tire
[Tolerance ±5 {0.20}]
(mm {in})
4.8 {0.19}
Rim inner
[Tolerance
16 inch wheel: ±2.9 {0.12}
18 inch wheel: ±3.3 {0.13}]
Vehicle equipped with 16 inch wheel: 2.8 {0.11}
Vehicle equipped with 18 inch wheel: 3.2 {0.13}
(degree)
0°24′±0°25′
Camber angle*2 (Reference value)
[Tolerance ±1°]
-1°27′
-1°28′
-1°28′
-1°28′
-1°29′
Thrust angle (Reference value) [Tolerance ±0°48′]
0°00′

*1  :Engine coolant and engine oil are at specified level. Spare tire, jack and tools are in designated position.
*2  :Difference between left and right must not exceed 1°00′.

Rear wheel alignment (Unloaded)*1 (Chinese specs.)

Item

Fuel gauge indication

Empty

1/4

1/2

3/4

Full
Total toe-in
Tire
[Tolerance ±5 {0.20}]
(mm {in})
4.8 {0.19}
Rim inner
[Tolerance
16 inch wheel: ±2.9 {0.12}
18 inch wheel: ±3.3 {0.13}]
Vehicle equipped with 16 inch wheel: 2.8 {0.11}
Vehicle equipped with 18 inch wheel: 3.2 {0.13}
(degree)
0°24′±0°25′
Camber angle*2 (Reference value)
[Tolerance ±1°]
-1°27′
-1°27′
-1°28′
-1°28′
-1°29′
Thrust angle (Reference value) [Tolerance ±0°48′]
0°00′

*1  :Engine coolant and engine oil are at specified level. Spare tire, jack and tools are in designated position.
*2  :Difference between left and right must not exceed 1°00′.