Home

Mazdamanuals.com

DTC U0140:00 [DSC HU/CM]

DTC U0140:00 [DSC HU/CM]


 id040262010800


Outline

System malfunction location

Communication error with body control module (BCM)

Detection condition
•  The DSC HU/CM cannot receive CAN (CAN BUS No.1) signal from the body control module (BCM).
Fail-safe
Refer to “DTC Table” and “Fail-safe Function Malfunction Contents Table”.(See DTC TABLE [DSC HU/CM (E)].)
Possible cause
•  Malfunction in CAN communication line (CAN BUS No.1) between body control module (BCM) and DSC HU/CM
System wiring diagram
Not applicable
Connector diagram
Not applicable


Diagnostic Procedure

•  Perform the malfunction diagnosis according to the troubleshooting procedure for the multiplex communication system.(See CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW [(E)].)