Home

Mazdamanuals.com

ELECTRIC PARKING BRAKE SWITCH REMOVAL/INSTALLATION

ELECTRIC PARKING BRAKE SWITCH REMOVAL/INSTALLATION


 id041200523000

1.  Disconnect the negative battery terminal.(See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(E)].)

2.  Remove the selector lever knob. (ATX) (See SELECTOR LEVER COMPONENT REMOVAL/INSTALLATION.)

3.  Remove the shift lever knob. (MTX) (See SHIFT LEVER REMOVAL/INSTALLATION [C66M-R, C66MX-R].)

4.  Remove the shift panel. (See SHIFT PANEL REMOVAL/INSTALLATION.)

5.  Remove the screws.

ac30zw00000123

6.  Remove the electric parking brake switch.

7.  Install in the reverse order of removal.

8.  After installation, perform the following procedure.

(1)  Pull up the electric parking brake switch.
(2)  Press the electric parking brake switch.
(3)  Operate the electric parking brake switch again and verify that the electric parking brake operates/releases.
•  If the electric parking brake cannot be operated/released, perform a DTC inspection as a malfunction of the electric parking brake may have occurred. (See DTC INSPECTION.)