Home

Mazdamanuals.com

PID/DATA MONITOR TABLE [CLIMATE CONTROL UNIT (FULL-AUTO AIR CONDITIONER) (E)]

PID/DATA MONITOR TABLE [CLIMATE CONTROL UNIT (FULL-AUTO AIR CONDITIONER) (E)]


 id0702k20114l2

—: Not applicable

PID/data monitor item

Unit/Operation

Data contents

Module control terminal

A/C_CTRL_STAT
Auto/OFF/AC
•  Auto: A/C compressor control is in AUTO
•  OFF: A/C compressor control is off
•  AC: A/C compressor control is on
A/C_MODE_CTRL_STAT
Auto/Vent/B/L/HEAT/H/D/DEF
•  Auto: Airflow mode setting is in AUTO
•  Vent: Airflow mode setting is in VENT
•  B/L: Airflow mode setting is in BI-LEVEL
•  HEAT: Airflow mode setting is in HEAT
•  H/D: Airflow mode setting is in DEF/HEAT
•  DEF: Airflow mode setting is in DEFROSTER
A/C_SW
OFF/ON
•  OFF: A/C switch is off
•  ON: A/C switch is on
AMB_TEMP_INTERNAL
°C, °F
Displays the cabin temperature detected by the passenger compartment temperature sensor.
ATC_CTRL
Displays the air-conditioning control mode condition.
AUTO_SW
OFF/ON
•  OFF: AUTO switch is off
•  ON: AUTO switch is on
CLIMATE_STAT
Stopped/IP-ESU Indicater all ON Control
•  Stopped: All of the indicators, display panel, and switch back lights on climate control unit are turned off
•  IP-ESU Indicater all ON Control: All of the indicators, display panel, and switch back lights on climate control unit are turned on
CRANKING_STAT
Displays during engine cranking or other than engine cranking.
DEF_SW
OFF/ON
•  OFF: DEFROSTER switch is off
•  ON: DEFROSTER switch is on
DIM_CANCEL
Displays the dimmer cancel condition.
FAN_CTRL_STAT
FAN OFF/FAN AUTO/Manual 1/Manual 2/Manual 3/Manual 4/Manual 5/Manual 6/Manual 7
•  FAN OFF: Blower motor is stopped
•  FAN AUTO: Blower motor is operating in auto control
•  Manual 1: Blower motor is operating in manual 1
•  Manual 2: Blower motor is operating in manual 2
•  Manual 3: Blower motor is operating in manual 3
•  Manual 4: Blower motor is operating in manual 4
•  Manual 5: Blower motor is operating in manual 5
•  Manual 6: Blower motor is operating in manual 6
•  Manual 7: Blower motor is operating in manual 7
FAN_DOWN_SW
OFF/ON
•  OFF: Airflow volume control switch (-) is not pressed
•  ON: Airflow volume control switch (-) is pressed
FAN_UP_SW
OFF/ON
•  OFF: Airflow volume control switch (+) is not pressed
•  ON: Airflow volume control switch (+) is pressed
GLOVE_BOX_LAMP_CTRL
OFF/ON
•  OFF: Glove compartment light is turned off
•  ON: Glove compartment light is turned on
HZRD_CTRL_STAT
OFF/ON
•  OFF: Hazard system is not operating
•  ON: Hazard system is operating
HZRD_SW
OFF/ON
•  OFF: Hazard warning switch is off
•  ON: Hazard warning switch is on
ILLMI_MODE
Displays the illumination mode.
ILLMI_POWER
Displays the illumination power supply condition.
INTAKE_CTRL_STAT
Auto/REC/FRESH
•  Auto: Air intake control setting is in AUTO
•  REC: Air intake control setting is in REC
•  FRESH: Air intake control setting is in FRESH
MODE_SW
OFF/ON
•  OFF: MODE switch is off
•  ON: MODE switch is on
ON_OFF_SW
OFF/ON
•  OFF: POWER switch is off
•  ON: POWER switch is on
PNL_BRIGHT_LVL
Displays the panel light brightness.
POWER_STAT
Displays the ignition switch condition.
R_DEF_CTRL_STAT
OFF/ON
•  OFF: Rear window defogger switch indicator is turned off (rear window defogger stopped)
•  ON: Rear window defogger switch indicator is turned on (rear window defogger operating)
R_DEF_SW
OFF/ON
•  OFF: Rear window defogger switch is off
•  ON: Rear window defogger switch is on
REC_SW
OFF/ON
•  OFF: RECIRCULATE/FRESH switch is off
•  ON: RECIRCULATE/FRESH switch is on
ROOM_FUSE_STAT
Displays the F27 25 A fuse condition.
SEAT_HEAT_STAT_L
OFF/Lo/Mid/Hi/AUTO
•  OFF: Seat warmer switch (LH) indicator is turned off
•  Lo: Seat warmer switch (LH) indicator is turned on at temperature level 1
•  Mid: Seat warmer switch (LH) indicator is turned on at temperature level 2
•  Hi: Seat warmer switch (LH) indicator is turned on at temperature level 3
•  AUTO: —
SEAT_HEAT_STAT_R
OFF/Lo/Mid/Hi/AUTO
•  OFF: Seat warmer switch (RH) indicator is turned off
•  Lo: Seat warmer switch (RH) indicator is turned on at temperature level 1
•  Mid: Seat warmer switch (RH) indicator is turned on at temperature level 2
•  Hi: Seat warmer switch (RH) indicator is turned on at temperature level 3
•  AUTO: —
SEAT_HEAT_SW_L
OFF/ON
•  OFF: Seat warmer switch (LH) is off
•  ON: Seat warmer switch (LH) is on
SEAT_HEAT_SW_R
OFF/ON
•  OFF: Seat warmer switch (RH) is off
•  ON: Seat warmer switch (RH) is on
SET_TEMP_UNIT
Displays the display setting (Fahrenheit/Celsius) for the set temperature.
STR_HEAT_STAT
OFF/Lo
•  OFF: Steering warmer switch indicator is turned off
•  Lo: Steering warmer switch indicator is turned on
STR_HEAT_SW
OFF/ON
•  OFF: Heated steering wheel switch is off
•  ON: Heated steering wheel switch is on
SYNC_SW
OFF/ON
•  OFF: SYNC switch is off
•  ON: SYNC switch is on
TEMP_DOWN_SW_L
OFF/ON
•  OFF: Temperature control dial (LH) is not rotated left
•  ON: Temperature control dial (LH) is rotated left
TEMP_DOWN_SW_R
OFF/ON
•  OFF: Temperature control dial (RH) is not rotated left
•  ON: Temperature control dial (RH) is rotated left
TEMP_UP_SW_L
OFF/ON
•  OFF: Temperature control dial (LH) is not rotated right
•  ON: Temperature control dial (LH) is rotated right
TEMP_UP_SW_R
OFF/ON
•  OFF: Temperature control dial (RH) is not rotated right
•  ON: Temperature control dial (RH) is rotated right
VOLT_5V
V
Displays the voltage for the 5 V power supply of the circuit in the climate control unit.
VPWR
V
Displays the power supply voltage (B+) to the climate control unit.