PID/DATA MONITOR TABLE [CLIMATE CONTROL UNIT (MANUAL AIR CONDITIONER) (E)]
id0702k30114l3
|
PID/data monitor item |
Unit/Operation |
Data contents |
Module control terminal |
|---|---|---|---|
|
A/C_CTRL_STAT
|
OFF/AC
|
• OFF: A/C compressor control is off
• AC: A/C compressor control is on
|
—
|
|
A/C_MAX_SW
|
OFF/ON
|
• OFF: Temperature control dial is not rotated to maximum left
• ON: Temperature control dial is rotated to maximum left
|
—
|
|
A/C_MODE_BILVL_SW
|
OFF/ON
|
• OFF: Mode switch (BI-LEVEL) is not pressed
• ON: Mode switch (BI-LEVEL) is pressed
|
—
|
|
A/C_MODE_CTRL_STAT
|
Vent/B/L/HEAT/H/D/DEF
|
• Vent: Airflow mode setting is in VENT
• B/L: Airflow mode setting is in BI-LEVEL
• HEAT: Airflow mode setting is in HEAT
• H/D: Airflow mode setting is in DEF/HEAT
• DEF: Airflow mode setting is in DEFROSTER
|
—
|
|
A/C_MODE_FLOOR_DEF_SW
|
OFF/ON
|
• OFF: Mode switch (DEF/HEAT) is not pressed
• ON: Mode switch (DEF/HEAT) is pressed
|
—
|
|
A/C_MODE_FLOOR_SW
|
OFF/ON
|
• OFF: Mode switch (HEAT) is not pressed
• ON: Mode switch (HEAT) is pressed
|
—
|
|
A/C_MODE_PNL_SW
|
OFF/ON
|
• OFF: Mode switch (VENT) is not pressed
• ON: Mode switch (VENT) is pressed
|
—
|
|
A/C_SW
|
OFF/ON
|
• OFF: A/C switch is off
• ON: A/C switch is on
|
—
|
|
ATC_CTRL
|
—
|
Displays the air-conditioning control mode condition.
|
—
|
|
CLIMATE_STAT
|
Stopped/IP-ESU Indicater all ON Control/Indicater all ON Mode
|
• Stopped: All of the indicators and switch back lights on climate control unit are turned off
• IP-ESU Indicater all ON Control: All of the indicators and switch back lights on climate control unit are turned on
• Indicater all ON Mode: While in all indicators on mode
|
—
|
|
CRANKING_STAT
|
—
|
Displays during engine cranking or other than engine cranking.
|
—
|
|
DEF_SW
|
OFF/ON
|
• OFF: DEFROSTER switch is off
• ON: DEFROSTER switch is on
|
—
|
|
DIM_CANCEL
|
—
|
Displays the dimmer cancel condition.
|
—
|
|
FAN_CTRL_STAT
|
FAN OFF/Manual 1/Manual 2/Manual 3/Manual 4/Manual 5/Manual 6/Manual 7
|
• FAN OFF: Blower motor is stopped
• Manual 1: Blower motor is operating in manual 1
• Manual 2: Blower motor is operating in manual 2
• Manual 3: Blower motor is operating in manual 3
• Manual 4: Blower motor is operating in manual 4
• Manual 5: Blower motor is operating in manual 5
• Manual 6: Blower motor is operating in manual 6
• Manual 7: Blower motor is operating in manual 7
|
—
|
|
FAN_DIAL_POS
|
FAN OFF/Manual 1/Manual 2/Manual 3/Manual 4/Manual 5/Manual 6/Manual 7
|
• FAN OFF: Airflow volume control dial is stopped at fan stop position
• Manual 1: Airflow volume control dial is stopped at manual 1 position
• Manual 2: Airflow volume control dial is stopped at manual 2 position
• Manual 3: Airflow volume control dial is stopped at manual 3 position
• Manual 4: Airflow volume control dial is stopped at manual 4 position
• Manual 5: Airflow volume control dial is stopped at manual 5 position
• Manual 6: Airflow volume control dial is stopped at manual 6 position
• Manual 7: Airflow volume control dial is stopped at manual 7 position
|
—
|
|
FAN_DIAL_VAL_A/D
|
LSB
|
Displays the A/D converted value of the airflow volume control dial.
|
—
|
|
GLOVE_BOX_LAMP_CTRL
|
OFF/ON
|
• OFF: Glove compartment light is turned off
• ON: Glove compartment light is turned on
|
—
|
|
HZRD_CTRL_STAT
|
OFF/ON
|
• OFF: Hazard system is not operating
• ON: Hazard system is operating
|
—
|
|
HZRD_SW
|
OFF/ON
|
• OFF: Hazard warning switch is off
• ON: Hazard warning switch is on
|
—
|
|
ILLMI_MODE
|
—
|
Displays the illumination mode.
|
—
|
|
ILLMI_POWER
|
—
|
Displays the illumination power supply condition.
|
—
|
|
INTAKE_CTRL_STAT
|
REC/FRESH
|
• REC: Air intake control setting is in REC
• FRESH: Air intake control setting is in FRESH
|
—
|
|
PNL_BRIGHT_LVL
|
—
|
Displays the panel light brightness.
|
—
|
|
POWER_STAT
|
—
|
Displays the ignition switch condition.
|
—
|
|
R_DEF_CTRL_STAT
|
OFF/ON
|
• OFF: Rear window defogger switch indicator is turned off (rear window defogger stopped)
• ON: Rear window defogger switch indicator is turned on (rear window defogger operating)
|
—
|
|
R_DEF_SW
|
OFF/ON
|
• OFF: Rear window defogger switch is off
• ON: Rear window defogger switch is on
|
—
|
|
REC_SW
|
OFF/ON
|
• OFF: RECIRCULATE switch is off
• ON: RECIRCULATE switch is on
|
—
|
|
ROOM_FUSE_STAT
|
—
|
Displays the F27 25 A fuse condition.
|
—
|
|
SEAT_HEAT_STAT_L
|
OFF/Lo/Mid/Hi
|
• OFF: Seat warmer switch (LH) indicator is turned off
• Lo: Seat warmer switch (LH) indicator is turned on at temperature level 1
• Mid: Seat warmer switch (LH) indicator is turned on at temperature level 2
• Hi: Seat warmer switch (LH) indicator is turned on at temperature level 3
|
—
|
|
SEAT_HEAT_STAT_R
|
OFF/Lo/Mid/Hi
|
• OFF: Seat warmer switch (RH) indicator is turned off
• Lo: Seat warmer switch (RH) indicator is turned on at temperature level 1
• Mid: Seat warmer switch (RH) indicator is turned on at temperature level 2
• Hi: Seat warmer switch (RH) indicator is turned on at temperature level 3
|
—
|
|
SEAT_HEAT_SW_L
|
OFF/ON
|
• OFF: Seat warmer switch (LH) is off
• ON: Seat warmer switch (LH) is on
|
—
|
|
SEAT_HEAT_SW_R
|
OFF/ON
|
• OFF: Seat warmer switch (RH) is off
• ON: Seat warmer switch (RH) is on
|
—
|
|
STR_HEAT_STAT
|
OFF/Lo
|
• OFF: Steering warmer switch indicator is turned off
• Lo: Steering warmer switch indicator is turned on
|
—
|
|
STR_HEAT_SW
|
OFF/ON
|
• OFF: Heated steering wheel switch is off
• ON: Heated steering wheel switch is on
|
—
|
|
TEMP_DIAL_POS
|
—
|
Displays the position of the temperature control dial.
|
—
|
|
TEMP_DIAL_VAL_A/D
|
LSB
|
Displays the A/D converted value of the temperature control dial.
|
—
|
|
VOLT_5V
|
V
|
Displays the voltage for the 5 V power supply of the circuit in the climate control unit.
|
—
|
|
VPWR
|
V
|
Displays the power supply voltage (B+) to the climate control unit.
|
—
|