Home

Mazdamanuals.com

DTC U0121:00 [DASH-ELECTRICAL SUPPLY UNIT (E)]

DTC U0121:00 [DASH-ELECTRICAL SUPPLY UNIT (E)]


 id0702k80086ka


Without Mazda M Hybrid


Outline

System malfunction location

Communication error with DSC HU/CM

Detection condition
•  The dash-electrical supply unit cannot receive CAN signal from the DSC HU/CM.
Fail-safe
•  The value of the data which is not received from the DSC HU/CM is fixed at the specified value.
Possible cause
•  Malfunction in CAN communication line between DSC HU/CM and dash-electrical supply unit
System wiring diagram
Not applicable
Connector diagram
Not applicable


Diagnostic procedure

•  Perform the malfunction diagnosis according to the troubleshooting procedure for the multiplex communication system. (See CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW [(E)].)


With Mazda M Hybrid


Outline

System malfunction location

Communication error with electronically controlled brake unit

Detection condition
•  The dash-electrical supply unit cannot receive CAN signal from the electronically controlled brake unit.
Fail-safe
•  The value of the data which is not received from the electronically controlled brake unit is fixed at the specified value.
Possible cause
•  Malfunction in CAN communication line between electronically controlled brake unit and dash-electrical supply unit
System wiring diagram
Not applicable
Connector diagram
Not applicable


Diagnostic procedure

•  Perform the malfunction diagnosis according to the troubleshooting procedure for the multiplex communication system. (See CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW [(E)].)