Home

Mazdamanuals.com

DTC B1193:00 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)]

id0802g8010800

Note

• The SRS air bag system can be identified by whether or not the seat track position sensor is present.

― Standard deployment control system: Without seat track position sensor

― Two-step deployment control system: With seat track position sensor

Outline

System malfunction location	SAS control module operation (deployment)
Detection condition	Warning • Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure. • SAS control module operates (deploys) (air bag module or pre-tensioner seat belt)
Fail-safe	• Not applicable
Possible cause	• SAS control module operation (deployment) • SAS control module malfunction
System wiring diagram	• Not applicable
Connector diagram	• Not applicable

Diagnostic Procedure

• Replace the SAS control module.