POSITION MEMORY SYSTEM MEMORY CLEARING
POSITION MEMORY SYSTEM MEMORY CLEARING
id091300872300
1. Connect the M-MDS to the DLC-2.
2. Switch the ignition ON (engine off).
3. Activate the M-MDS and perform the following procedure.
- (1) Press [Start] to start the vehicle identification.
-
- (2) Press the [Toolbox] tab.
-
- (3) Press the [Work Support] icon.
-
- (4) Press [SEATS].
-
- (5) Press [Run] for [Erasing Driving Position Memories].
-
- (6) Confirm the Erasing Driving Position Memories procedure from Step (7) to Step (9), and press [Next].
-
- (7) Verify that the ignition is switched ON (engine off) and press [Next].
-
- (8) Press [Next] to perform [Erasing Driving Position Memories].
-
- (9) Press [Next] to complete [Erasing Driving Position Memories].
-