Home

Mazdamanuals.com

DTC U0156:00 [VEHICLE CONTROL MODULE (E)]

id1502c50350cb

Except Chinese Specs.

Outline

System malfunction location

Communication error with connectivity master unit (CMU)

Detection condition

•  The vehicle control module (VCM) cannot receive CAN signal from connectivity master unit (CMU) for 10 s.

Fail-safe

(See DTC TABLE [VEHICLE CONTROL MODULE (E)].)

Possible cause

•  Malfunction in CAN communication line between vehicle control module (VCM) and connectivity master unit (CMU)

•  Connectivity master unit (CMU) malfunction

•  Vehicle control module (VCM) malfunction (built into body control module (BCM))

•  Body control module (BCM) malfunction

System wiring diagram

Not applicable

System malfunction location	Communication error with connectivity master unit (CMU)
Detection condition	• The vehicle control module (VCM) cannot receive CAN signal from connectivity master unit (CMU) for 10 s.
Fail-safe	(See DTC TABLE [VEHICLE CONTROL MODULE (E)].)
Possible cause	• Malfunction in CAN communication line between vehicle control module (VCM) and connectivity master unit (CMU) • Connectivity master unit (CMU) malfunction • Vehicle control module (VCM) malfunction (built into body control module (BCM)) • Body control module (BCM) malfunction
System wiring diagram	Not applicable

Diagnostic Procedure

• Perform an inspection in accordance with the multiplex communication system diagnostic procedure. (See CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW [(E)].)

Chinese Specs.

Outline

System malfunction location

Communication error with audio control unit (ACU)

Detection condition

•  The vehicle control module (VCM) cannot receive CAN signal from audio control unit (ACU) for 10 s.

Fail-safe

(See DTC TABLE [VEHICLE CONTROL MODULE (E)].)

Possible cause

•  Malfunction in CAN communication line between vehicle control module (VCM) and audio control unit (ACU)

•  Audio control unit (ACU) malfunction

•  Vehicle control module (VCM) malfunction (built into body control module (BCM))

•  Body control module (BCM) malfunction

System wiring diagram

Not applicable

System malfunction location	Communication error with audio control unit (ACU)
Detection condition	• The vehicle control module (VCM) cannot receive CAN signal from audio control unit (ACU) for 10 s.
Fail-safe	(See DTC TABLE [VEHICLE CONTROL MODULE (E)].)
Possible cause	• Malfunction in CAN communication line between vehicle control module (VCM) and audio control unit (ACU) • Audio control unit (ACU) malfunction • Vehicle control module (VCM) malfunction (built into body control module (BCM)) • Body control module (BCM) malfunction
System wiring diagram	Not applicable

Diagnostic Procedure

• Perform an inspection in accordance with the multiplex communication system diagnostic procedure. (See CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW [(E)].)