Home

Mazdamanuals.com

DTC U212E:00 [VEHICLE CONTROL MODULE]

id1502c5037200

Outline

System malfunction location

Communication error with door-electrical supply unit (driver’s side)

Detection condition

•  The vehicle control module (VCM) cannot receive CAN signal from door-electrical supply unit (driver’s side) for 10 s.

Fail-safe

(See DTC TABLE [VEHICLE CONTROL MODULE (E)].)

Possible cause

•  Malfunction in CAN communication line between vehicle control module (VCM) and door-electrical supply unit (driver’s side)

•  Door-electrical supply unit (driver’s side) malfunction

•  Vehicle control module (VCM) malfunction (built into body control module (BCM))

•  Body control module (BCM) malfunction

System wiring diagram

Not applicable

System malfunction location	Communication error with door-electrical supply unit (driver’s side)
Detection condition	• The vehicle control module (VCM) cannot receive CAN signal from door-electrical supply unit (driver’s side) for 10 s.
Fail-safe	(See DTC TABLE [VEHICLE CONTROL MODULE (E)].)
Possible cause	• Malfunction in CAN communication line between vehicle control module (VCM) and door-electrical supply unit (driver’s side) • Door-electrical supply unit (driver’s side) malfunction • Vehicle control module (VCM) malfunction (built into body control module (BCM)) • Body control module (BCM) malfunction
System wiring diagram	Not applicable

Diagnostic Procedure

• Perform an inspection in accordance with the multiplex communication system diagnostic procedure. (See CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW [(E)].)