Home

Mazdamanuals.com

DTC U2125:00 [VEHICLE CONTROL MODULE]

id1502c5049900

Outline

System malfunction location

Communication error with driver monitoring camera unit

Detection condition

•  The vehicle control module cannot receive CAN signal from the driver monitoring camera unit for 10 s.

Fail-safe

(See DTC TABLE [VEHICLE CONTROL MODULE (E)].)

Possible cause

•  Power is not supplied from vehicle control module (VCM) to driver monitoring camera (built into center display)

•  Malfunction in CAN communication line between vehicle control module (VCM) and driver monitoring camera unit

•  Driver monitoring camera unit malfunction

•  Vehicle control module (VCM) malfunction (built into body control module (BCM))

System wiring diagram

Not applicable

System malfunction location	Communication error with driver monitoring camera unit
Detection condition	• The vehicle control module cannot receive CAN signal from the driver monitoring camera unit for 10 s.
Fail-safe	(See DTC TABLE [VEHICLE CONTROL MODULE (E)].)
Possible cause	• Power is not supplied from vehicle control module (VCM) to driver monitoring camera (built into center display) • Malfunction in CAN communication line between vehicle control module (VCM) and driver monitoring camera unit • Driver monitoring camera unit malfunction • Vehicle control module (VCM) malfunction (built into body control module (BCM))
System wiring diagram	Not applicable

Diagnostic Procedure

• Perform an inspection in accordance with the multiplex communication system diagnostic procedure. (See CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW [(E)].)