Home

Mazdamanuals.com

DTC B14F7:88 [VEHICLE CONTROL MODULE]

id1502c5057500

With 360°View Monitor System

Outline

System malfunction location

Unit communication error (CAN)

Detection condition

•  The vehicle control module (VCM) received a BUS OFF signal (CAN) from the 360°view monitor control module for 10 s.

Fail-safe

(See DTC TABLE [VEHICLE CONTROL MODULE (E)].)

Possible cause

•  Malfunction in CAN BUS communication line between vehicle control module (VCM) and 360°view monitor control module

•  360°view monitor control module malfunction

•  Vehicle control module (VCM) malfunction

System wiring diagram

Not applicable

System malfunction location	Unit communication error (CAN)
Detection condition	• The vehicle control module (VCM) received a BUS OFF signal (CAN) from the 360°view monitor control module for 10 s.
Fail-safe	(See DTC TABLE [VEHICLE CONTROL MODULE (E)].)
Possible cause	• Malfunction in CAN BUS communication line between vehicle control module (VCM) and 360°view monitor control module • 360°view monitor control module malfunction • Vehicle control module (VCM) malfunction
System wiring diagram	Not applicable

Diagnostic Procedure

• Perform an inspection in accordance with the multiplex communication system diagnostic procedure. (See CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW [(E)].)

With Parking Assist System

Outline

System malfunction location

Unit communication error (CAN)

Detection condition

•  The vehicle control module (VCM) received a BUS OFF signal (CAN) from the parking assist unit (optical) for 10 s.

Fail-safe

(See DTC TABLE [VEHICLE CONTROL MODULE (E)].)

Possible cause

•  Malfunction in CAN BUS communication line between vehicle control module (VCM) and parking assist unit (optical)

•  Parking assist unit (optical) malfunction

•  Vehicle control module (VCM) malfunction

System wiring diagram

Not applicable

System malfunction location	Unit communication error (CAN)
Detection condition	• The vehicle control module (VCM) received a BUS OFF signal (CAN) from the parking assist unit (optical) for 10 s.
Fail-safe	(See DTC TABLE [VEHICLE CONTROL MODULE (E)].)
Possible cause	• Malfunction in CAN BUS communication line between vehicle control module (VCM) and parking assist unit (optical) • Parking assist unit (optical) malfunction • Vehicle control module (VCM) malfunction
System wiring diagram	Not applicable

Diagnostic Procedure

• Perform an inspection in accordance with the multiplex communication system diagnostic procedure. (See CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW [(E)].)