STEP
|
INSPECTION
|
RESULTS
|
ACTION
|
1
|
Verify the following:
• Proper dipstick
• Proper engine viscosity
• Engine oil level
Are all items normal?
|
Yes
|
Go to the next step.
|
No
|
Service if necessary.
Repeat Step 1.
|
2
|
Remove if necessary to inspect the turbocharger.
-
Note
-
• Do not remove the turbocharger.
Inspect if the turbocharger compressor wheel is bent, damaged, or interfering with housing on vehicle.
Is there any malfunction?
|
Yes
|
Replace the turbocharger.
|
No
|
Go to the next step.
|
3
|
Inspect if the turbocharger compressor wheel locknut is loose or has fallen down inside turbocharger.
Is there any malfunction?
|
Yes
|
Replace the turbocharger.
|
No
|
Go to the next step.
|
4
|
Turn the turbocharger compressor wheel by hand.
Does the wheel turn easily and smoothly?
|
Yes
|
Go to the next step.
|
No
|
Replace the turbocharger.
|
5
|
Inspect if the turbocharger turbine wheel is damaged, cracked or interfering with the housing on the vehicle.
-
Note
-
• Inspect all fins on each turbine wheel.
Is there any malfunction?
|
Yes
|
Replace the turbocharger.
|
No
|
Go to the next step.
|
6
|
Is any engine oil found inside the turbocharger turbine housing?
|
Yes
|
Excessive amount of oil is found:
Replace the turbocharger.
Small amount of oil is found:
Wipe oil off of the vehicle, then go to the next step.
|
No
|
Go to the next step.
|
7
|
Is any engine oil found inside the turbocharger compressor housing?
|
Yes
|
Wipe oil off of vehicle, then go to the next step.
|
No
|
Go to the next step.
|
8
|
Is any engine oil found around oil pipes attached on turbocharger center housing?
|
Yes
|
If oil leaks from a damaged pipe, replace the oil pipe.
Then, go to the next step.
|
No
|
Go to the next step.
|
9
|
Is any engine oil found inside air intake pipes or hoses?
|
Yes
|
Wipe engine oil off.
|
No
|
Turbocharger is normal.
Install all parts removed in Step 2.
Then go to the next step.
|
10
|
Is the engine compression correct?
|
Yes
|
Inspect for oil leakage from outside of engine.
|
No
|
Inspect the following:
• Damaged valve seat
• Worn valve stem and valve guide
• Worn or stuck piston ring
• Worn piston, piston ring or cylinder
Service if necessary.
|
11
|
Verify test results.
• If normal, return to the diagnostic index to service any additional symptoms.
• If the malfunction remains, inspect the related Service Information and perform repair or diagnosis.
-
- If the vehicle is repaired, troubleshooting completed.
-
- If the vehicle is not repaired or additional diagnostic information is not available, reprogram the PCM if later calibration is available. Retest.
|