GLOW PLUG INSPECTION [MZR-CD (RF Turbo)]
GLOW PLUG INSPECTION [MZR-CD (RF Turbo)]
id0113f1804300
-
Note
-
• Perform the following test only when directed.
1. Remove the glow plug lead. (See GLOW PLUG REMOVAL/INSTALLATION [MZR-CD (RF Turbo)].)
2. Measure the resistance between the glow plug terminal and the cylinder head (body ground) using an ohmmeter.
-
• If not as specified, replace the glow plug. (See GLOW PLUG REMOVAL/INSTALLATION [MZR-CD (RF Turbo)]
Resistance (Reference value)
-
Approx. 0.6 ohms [20°C {68°F}]
3. Install the glow plug lead.
