Home

Mazdamanuals.com

FUEL INJECTOR INSPECTION [MZR-CD (RF Turbo)]

id0114f1800700

Resistance Inspection

Note

• Perform the following test only when directed.

1. Disconnect the negative battery cable.

2. Disconnect the fuel injector connectors.

3. Measure the resistance of the fuel injector using an ohmmeter.

d6e114bw6002

• If not as specified, replace the fuel injector. (See FUEL INJECTOR REMOVAL/INSTALLATION [MZR-CD (RF Turbo)].)

• If as specified, carry out the “Circuit Open/Short Inspection”.

Resistance (without circle mark)

Approx. 0.45 ohms

am3zzw00004808

Resistance (with circle mark)

Approx. 0.47 ohms

Circuit Open/Short Inspection

1. Disconnect the PCM connector.

2. Inspect the following wiring harnesses for open or short (continuity check).

d6e114bw6003

dpe114bw2114

Open circuit

• If there is no continuity, the circuit is open. Repair or replace the wiring harness.

― No.1 cylinder fuel injector terminal B and PCM terminal 42.

― No.2 cylinder fuel injector terminal B and PCM terminal 21.

― No.3 cylinder fuel injector terminal B and PCM terminal 23.

― No.4 cylinder fuel injector terminal B and PCM terminal 40.

― No.1 cylinder fuel injector terminal A and PCM terminal 4.

― No.2 cylinder fuel injector terminal A and PCM terminal 4.

― No.3 cylinder fuel injector terminal A and PCM terminal 4.

― No.4 cylinder fuel injector terminal A and PCM terminal 4.

Short circuit

• If there is continuity, the circuit is short. Repair or replace the wiring harness.

― No.1 cylinder fuel injector terminal B and body ground.

― No.2 cylinder fuel injector terminal B and body ground.

― No.3 cylinder fuel injector terminal B and body ground.

― No.4 cylinder fuel injector terminal B and body ground.

― No.1 cylinder fuel injector terminal A and body ground.

― No.2 cylinder fuel injector terminal A and body ground.

― No.3 cylinder fuel injector terminal A and body ground.

― No.4 cylinder fuel injector terminal A and body ground.

― No.1 cylinder fuel injector terminal B and power supply.

― No.2 cylinder fuel injector terminal B and power supply.

― No.3 cylinder fuel injector terminal B and power supply.

― No.4 cylinder fuel injector terminal B and power supply.

― No.1 cylinder fuel injector terminal A and power supply.

― No.2 cylinder fuel injector terminal A and power supply.

― No.3 cylinder fuel injector terminal A and power supply.

― No.4 cylinder fuel injector terminal A and power supply.