BATTERY RECHARGING [MZR-CD (RF Turbo)]
BATTERY RECHARGING [MZR-CD (RF Turbo)]
id0117f1800700
-
Warning
-
• Keep all flames away from the battery, otherwise evaporated gas from the battery fluid may catch fire, and cause serious injury.
-
• Remove the battery filler caps when recharging to prevent battery deformation or damage.
-
Caution
-
• Do not quick charge for more than 30 min. It will damage the battery.
1. Remove the battery and then place it in a pan of water.
2. Connect a battery charger to the battery and adjust the charging current as follows.
Battery slow charge current
-
95D31L (64): 6.5-8.0 A
-
115D31L (70): 7.0-8.5 A
Battery quick charge current [30 min.]
-
95D31L (64): 40 A
-
115D31L (70): 45 A
3. After the battery is recharged, verify that the voltage is within the specification and remains at the same value for 1 h or more after the recharging was completed.
-
• If not within the specification, replace the battery.
Standard voltage
-
12.4 V or more