|
DTC |
B1342 |
ABS (ABS/TCS) HU/CM |
|
|
DETECTION CONDITION |
The on-board diagnostic function detects control module malfunction.
|
||
|
POSSIBLE CAUSE |
• Malfunction of ABS (ABS/TCS) HU/CM
|
||
Diagnostic procedure
|
STEP
|
INSPECTION
|
ACTION
|
|
|---|---|---|---|
|
1
|
VERIFY CURRENT STATUS OF MALFUNCTION
• Clear the DTC from the memory.
(See Clearing DTCs Procedures.)
• Start engine and drive vehicle at 10 km/h {6.2 mph} or above.
• Is same DTC present?
|
Yes
|
Replace ABS (ABS/TCS) HU/CM, then go to the next step.
|
|
No
|
Inspect intermittent concern using the same procedure as engine control system.
|
||
|
2
|
VERIFY AFTER REPAIR PROCEDURE
• Is there any other DTC present?
|
Yes
|
Go to the applicable DTC inspection.
(See DTC Table.)
|
|
No
|
Troubleshooting completed.
|
||