Home

Mazdamanuals.com

 NO.27 GEAR POSITION INDICATOR LIGHT DOES NOT ILLUMINATE IN M RANGE [JA5AX-EL]

NO.27 GEAR POSITION INDICATOR LIGHT DOES NOT ILLUMINATE IN M RANGE [JA5AX-EL]

id050305803200

27

Gear position indicator light does not illuminate in M range

DESCRIPTION

• Gear position indicator light in instrument cluster does not illuminate in M range and ignition switch at on.

POSSIBLE CAUSE

• M range switch, gear position indicator light or related wiring harness malfunction.
Note
• Before following troubleshooting steps, make sure that Automatic Transaxle On-Board Diagnostic and Automatic Transaxle Basic Inspection are conducted.

Diagnostic procedure

STEP

INSPECTION

ACTION

1
• Are other indicator lights illuminated with ignition switch on?
Yes
Go to next step.
No
Inspect meter fuse.
2
• Inspect MNL SW PID value using WDS or equivalent.
• Are these PIDs okay?
Yes
Inspect instrument cluster.
No
Inspect M range switch.
If M range switch is okay, inspect for continuity between M range switch and TCM terminal 1AA.
3
• Verify test results.
- If okay, return to diagnostic index to service any additional symptoms.
- If malfunction remains, inspect related Service Informations and perform repair or diagnosis.
• If vehicle repaired, troubleshooting completed.
• If vehicle not repaired or additional diagnostic information not available, replace TCM.