Home

Mazdamanuals.com

STARTER INTERLOCK SWITCH INSPECTION [SKYACTIV-X 2.0]

STARTER INTERLOCK SWITCH INSPECTION [SKYACTIV-X 2.0]

 id0119hf104200

Caution
•  Do not reuse the starter interlock switch if it is removed from the vehicle even once. Replace with a new starter interlock switch when installing.

1.  Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(E)].)

2.  Disconnect the starter interlock switch connector.

3.  Verify that the continuity is as indicated in the table using a tester.

am6zzw00002367
am3zzw00034776

•  If the continuity is not as indicated in the table, replace the starter interlock switch.
(See STARTER INTERLOCK SWITCH REMOVAL/INSTALLATION [C66M-R, C66MX-R].)