Home

Mazdamanuals.com

ENGINE OIL PRESSURE SENSOR INSPECTION [SKYACTIV-X 2.0]

ENGINE OIL PRESSURE SENSOR INSPECTION [SKYACTIV-X 2.0]

 id0140hf216900


Voltage Inspection

Note
•  The engine oil temperature sensor and engine oil pressure sensor cannot be removed as a single unit. When replacing the engine oil temperature sensor or engine oil pressure sensor, replace the engine oil temperature sensor/engine oil pressure sensor.

1.  Switch the ignition ON (engine off).

2.  Measure the voltage at the engine oil temperature sensor/engine oil pressure sensor terminal C.

am3zzw00035412

•  If the voltage is within the specification, go to the next step.
•  If the voltage is not within the specification, replace the engine oil temperature sensor/engine oil pressure sensor. (See ENGINE OIL TEMPERATURE SENSOR/ENGINE OIL PRESSURE SENSOR REMOVAL/INSTALLATION [SKYACTIV-X 2.0].)
Specification
Approx. 0.5 V

3.  Connect the M-MDS to the DLC-2.

4.  Start the engine.

5.  Access the PID/DATA monitor item “OIL_PRES” using the M-MDS. (See PID/DATA MONITOR INSPECTION.)

6.  Measure the voltage at the engine oil temperature sensor/engine oil pressure sensor terminal C when the OIL_PRES PID increases.

•  If the voltage does not increase, replace the engine oil temperature sensor/engine oil pressure sensor. (See ENGINE OIL TEMPERATURE SENSOR/ENGINE OIL PRESSURE SENSOR REMOVAL/INSTALLATION [SKYACTIV-X 2.0].)

Specification (Reference)

am3zzw00035413