Home

Mazdamanuals.com

CLUTCH STROKE SENSOR INSPECTION [SKYACTIV-X 2.0]

CLUTCH STROKE SENSOR INSPECTION [SKYACTIV-X 2.0]

 id0140hf889000

Note
•  The clutch stroke sensor cannot be removed as a single unit. When replacing the clutch stroke sensor, replace it together with the clutch master cylinder as a single unit.

PID/DATA Monitor Inspection

1.  Connect the M-MDS to the DLC-2.

2.  Switch the ignition ON (engine off).

3.  Verify that the clutch pedal position (PID: CLTCH_PEDAL_POS) input from the clutch stroke sensor is within the standard when the clutch pedal is depressed. (See PID/DATA MONITOR INSPECTION.)(See PID/DATA MONITOR TABLE [PCM (SKYACTIV-X)].)

•  If not within the specification, replace the clutch master cylinder. (See CLUTCH MASTER CYLINDER REMOVAL/INSTALLATION [C66M-R, C66MX-R].)

Specification (Reference)

am3zzw00035109