Mazdamanuals.com

MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR/INTAKE AIR TEMPERATURE (IAT) SENSOR No.2 REMOVAL/INSTALLATION [SKYACTIV-X 2.0]

Home  id0140hf900700

Note

•  IAT sensor No.2 is built into MAP sensor. When replacing IAT sensor No.2, replace MAP sensor/IAT sensor No.2.

1.  Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(E)].)

2.  Remove the engine cover. (See ENGINE COVER REMOVAL/INSTALLATION [SKYACTIV-X 2.0].)

3.  Disconnect the MAP sensor/IAT sensor No.2 connector.

ac30zw00003139

4.  Remove MAP sensor/IAT sensor No.2.

ac30zw00003140

5.  Install in the reverse order of removal.