Home

Mazdamanuals.com

LP-EGR CONTROL VALVE POSITION SENSOR REMOVAL/INSTALLATION [SKYACTIV-D 1.8]

LP-EGR CONTROL VALVE POSITION SENSOR REMOVAL/INSTALLATION [SKYACTIV-D 1.8]

 id0140s1498200

Note
•  The LP-EGR control valve position sensor is built into the LP-EGR control valve. When replacing the LP-EGR control valve position sensor, replace the LP-EGR control valve.

1.  Remove the LP-EGR control valve. (See LP-EGR CONTROL VALVE REMOVAL/INSTALLATION [SKYACTIV-D 1.8].)