 |
ac30zw00001915
TRANSFER OIL REPLACEMENT [C66MX-R]
id0316f8800300
Replacement Part
|
Washer
Quantity: 1
Location of use: Drain plug
|
Washer
Quantity: 1
Location of use: Oil level plug
|
Oil and Chemical Type
|
Transfer oil
MAZDA LONG LIFE HYPOID GEAR OIL SG1
|
1. Remove the front under cover No.2. (See FRONT UNDER COVER No.2 REMOVAL/INSTALLATION.)
2. Remove the drain plug with the washer.
ac30zw00001915
|
3. Drain the Transfer oil.
4. Install the drain plug with a new washer.
ac30zw00001915
|
5. Remove the front crossmember component. (SKYACTIV-G 2.0) (See FRONT CROSSMEMBER REMOVAL/INSTALLATION [(E)].)
6. Remove the exhaust manifold (WU-TWC). (SKYACTIV-G 2.0) (See EXHAUST SYSTEM REMOVAL/INSTALLATION [SKYACTIV-G (WITH CYLINDER DEACTIVATION (E))].)
7. Remove the bracket. (SKYACTIV-X 2.0) (See TRANSFER REMOVAL/INSTALLATION [C66MX-R (SKYACTIV-X 2.0)].)
8. Remove the heat shield. (See TRANSFER REMOVAL/INSTALLATION [C66MX-R (SKYACTIV-G 2.0)].) (See TRANSFER REMOVAL/INSTALLATION [C66MX-R (SKYACTIV-D 1.8)].) (See TRANSFER REMOVAL/INSTALLATION [C66MX-R (SKYACTIV-X 2.0)].)
9. Remove the transfer bracket. (See TRANSFER REMOVAL/INSTALLATION [C66MX-R (SKYACTIV-G 2.0)].) (See TRANSFER REMOVAL/INSTALLATION [C66MX-R (SKYACTIV-D 1.8)].) (See TRANSFER REMOVAL/INSTALLATION [C66MX-R (SKYACTIV-X 2.0)].)
10. Remove the oil level plug and washer, and then add transfer oil from the oil level plug installation hole.
ac30zw00001916
|
|
Transfer oil type |
Transfer oil capacity (approx. quantity) |
|---|---|
|
MAZDA LONG LIFE HYPOID GEAR OIL SG1
|
0.35 L {0.37 US qt, 0.31 Imp qt}
|
11. Install the oil level plug with a new washer.
ac30zw00001916
|
12. Install the transfer bracket. (See TRANSFER REMOVAL/INSTALLATION [C66MX-R (SKYACTIV-G 2.0)].) (See TRANSFER REMOVAL/INSTALLATION [C66MX-R (SKYACTIV-D 1.8)].) (See TRANSFER REMOVAL/INSTALLATION [C66MX-R (SKYACTIV-X 2.0)].)
13. Install the heat shield. (See TRANSFER REMOVAL/INSTALLATION [C66MX-R (SKYACTIV-G 2.0)].) (See TRANSFER REMOVAL/INSTALLATION [C66MX-R (SKYACTIV-D 1.8)].) (See TRANSFER REMOVAL/INSTALLATION [C66MX-R (SKYACTIV-X 2.0)].)
14. Install the bracket. (SKYACTIV-X 2.0) (See TRANSFER REMOVAL/INSTALLATION [C66MX-R (SKYACTIV-X 2.0)].)
15. Install the exhaust manifold (WU-TWC). (SKYACTIV-G 2.0) (See EXHAUST SYSTEM REMOVAL/INSTALLATION [SKYACTIV-G (WITH CYLINDER DEACTIVATION (E))].)
16. Install the front crossmember component. (SKYACTIV-G 2.0) (See FRONT CROSSMEMBER REMOVAL/INSTALLATION [(E)].)
17. Install the front under cover No.2. (See FRONT UNDER COVER No.2 REMOVAL/INSTALLATION.)
