Home

Mazdamanuals.com

DTC C1042:44 [DSC HU/CM]

DTC C1042:44 [DSC HU/CM]


 id040262006800


Outline

System malfunction location

DSC HU/CM (internal malfunction)

Detection condition
•  The DSC HU/CM detects a malfunction in the internal RAM.
Fail-safe
Refer to “DTC Table” and “Fail-safe Function Malfunction Contents Table”.(See DTC TABLE [DSC HU/CM (E)].)
Possible cause
•  DSC HU/CM internal malfunction
System wiring diagram
Not applicable
Connector diagram
Not applicable


Diagnostic Procedure

Step

Inspection

Results

Action

1
INSPECT DSC HU/CM FOR MALFUNCTION DEPENDING ON REPEATABILITY
•  Clear the DTC recorded in the memory.
•  Switch the ignition ON (engine off or on) and wait for 3 min or more.
•  Perform the DTC inspection for the DSC HU/CM.
•  Is the same Pending DTC present?
Yes
Replace the DSC HU/CM and perform the repair completion verification.
No
Go to the next step.
Repair completion verification
VERIFY IF OTHER DTCs DISPLAYED
•  Perform the DTC inspection.
•  Are any DTCs displayed?
Yes
Repair the malfunctioning location according to the applicable DTC troubleshooting.
No
DTC troubleshooting completed.