Mazdamanuals.com

MAGNETIC CLUTCH ADJUSTMENT [SKYACTIV-G]

Home  id0711000064k8

Warning

•  If the engine is started while servicing the A/C compressor, the drive belt could get caught causing injury. Never start the engine while servicing the A/C compressor.

1.  Remove the front under cover No.2. (See FRONT UNDER COVER No.2 REMOVAL/INSTALLATION.)

2.  Measure the clearance around the entire circumference between the pressure plate and A/C compressor pulley using a thickness gauge.

am3zzw00021317

3.  Verify that the magnetic clutch clearance is the standard.

•  If the magnetic clutch clearance is not within the standard, adjust the magnetic clutch clearance by changing the type or number of the shim kit. (See MAGNETIC CLUTCH DISASSEMBLY/ASSEMBLY [SKYACTIV-G].)

am3zzw00021318