|
STEP
|
INSPECTION
|
ACTION
|
|
1
|
VERIFY FREEZE FRAME DATA HAS BEEN RECORDED
• Has FREEZE FRAME PID DATA been recorded?
|
Yes
|
Go to next step.
|
|
No
|
Record FREEZE FRAME PID DATA on repair order, then go to next step.
|
|
2
|
VERIFY RELATED REPAIR INFORMATION AVAILABILITY
• Check for related Service Bulletins and/or on-line repair information availability.
• Is any related repair information available?
|
Yes
|
Perform repair or diagnosis according to available repair information.
• If vehicle is not repaired, go to next step.
|
|
No
|
Go to next step.
|
|
3
|
CHECK FOR DTC
• Turn ignition key to ON (engine OFF).
• Inspect DTC.
• Is DTC outputted?
|
Yes
|
Follow applicable DTC inspection procedure.
|
|
No
|
Go to next step.
|
|
4
|
CHECK ATF CONDITION
• Turn ignition key to OFF.
• Check ATF condition.
-
- Transparent red: Normal
-
- Milky: Water mixed in fluid
-
- Reddish brown: Deteriorated ATF
• Is it okay?
|
Yes
|
Replace control valve body, then go to next step.
|
|
No
|
If ATF color milky or reddish brown, reaper or replace ATX, then go to next step.
|
|
5
|
VERIFY TROUBLESHOOTING OF DTC P0757 COMPLETED.
• Make sure to reconnect all disconnected connectors.
• Clear DTC from memory using WDS or equivalent.
• Start engine.
• Warm up ATX.
• Drive vehicle in D range and make sure that gears shift smoothly from 1GR to 5GR.
• Is same DTC present?
|
Yes
|
Replace TCM, then go to next step.
|
|
No
|
Go to next step.
|
|
6
|
VERIFY AFTER REPAIR PROCEDURE
• Perform "After Repair Procedure".
• Is there any DTC present?
|
Yes
|
Go to applicable DTC inspection.
|
|
No
|
Troubleshooting completed.
|