Home

Mazdamanuals.com

 SECURITY LIGHT: DTC 13 (WDS OR EQUIVALENT: DTC -/B1600)

SECURITY LIGHT: DTC 13 (WDS OR EQUIVALENT: DTC -/B1600)

id0902i8914800

DTC 13

(-/B1600)

ID number signal is not received.

POSSIBLE CAUSE

• No transponder in the key
• Defective transponder in the key (ID number is not output.)
• Defective coil antenna
• Defective PCM
• Defective keyless control module
• Any of the following items are touching or near the key head.
- Spare keys
- Keys for other vehicles equipped with an immobilizer system
- Any metallic object
- Any electronic device, or any credit or other cards with magnetic strips

Diagnostic procedure

STEP

INSPECTION

ACTION

1
VERIFY DTC USING SST
• Does SST (WDS or equivalent) indicate DTC -/B1600?
Yes
Go to Step 3.
No
Go to the next step.
2
VERIFY DTC USING SST
• Does SST (WDS or equivalent) indicate DTC -/B2431?
Yes
Go to SECURITY LIGHT: DTC 13 (WDS OR EQUIVALENT: -/B2431).
No
Go to the next step.
3
VERIFY VALID KEY
• Is there any key, other than the one that caused displayed DTC, which can start the engine?
Yes
Go to Step 5.
No
Go to the next step.
4
VERIFY WHETHER MALFUNCTION IS IN COIL ANTENNA OR KEY
• Using SST (WDS or equivalent) register an additional key.
• Using registered key, turn ignition switch to ON position.
• Does SST (WDS or equivalent) indicate DTC -/B1600 again?
Yes
Replace coil antenna, then go to step 6.
No
• Dispose of defective key.
• Duplicate key if necessary.
5
VERIFY WHETHER MALFUNCTION IS IN COIL ANTENNA OR KEY
• Using any other valid key, turn ignition switch to ON position.
• Does SST (WDS or equivalent) indicate DTC -/B1600 again?
Yes
Replace coil antenna, then go to next step.
No
• Dispose of defective key.
• Duplicate key if necessary.
6
INSPECT PCM
• Using registered key, turn ignition switch to ON position.
• Does SST (WDS or equivalent) indicate DTC -/B1600 again?
Yes
Replace PCM and reprogram immobilizer system.
No
DTC troubleshooting completed.