Diagnostic procedure
STEP
|
INSPECTION
|
ACTION
|
|
---|---|---|---|
1
|
INSPECT FOR OTHER PROPER KEYS
• Using any other valid key, turn ignition switch to ON position.
• If there are no other valid keys, then register an additional key using SST (WDS or equivalent) and turn ignition switch to ON position.
(See IMMOBILIZER SYSTEM COMPONENT REPLACEMENT/KEY ADDITION AND CLEARING [WITH ADVANCED KEYLESS SYSTEM])
• Does SST (WDS or equivalent) indicate DTC -/B1602 again?
|
Yes
|
Replace coil antenna, then go to next step.
|
No
|
• Dispose of defective key.
• Duplicate key if necessary.
|
||
2
|
INSPECT KEYLESS CONTROL MODULE
• Turn the ignition switch to the ON position.
• Is the DTC displayed?
|
Yes
|
Replace keyless control module, then go to the next step.
|
No
|
DTC troubleshooting completed.
|