 |
am3zzw00035762
GPF PRESSURE SENSOR REMOVAL/INSTALLATION [SKYACTIV-X 2.0]
id0140hf624900
Replacement part
|
Vacuum hose
Quantity: 2
Location of use: GPF pressure sensor
|
1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(E)].)
2. Remove the engine cover. (See ENGINE COVER REMOVAL/INSTALLATION [SKYACTIV-X 2.0].)
3. Remove the left wall (rear). (See SIDE WALL REMOVAL/INSTALLATION [SKYACTIV-X 2.0].)
4. Remove the rear wall. (See SIDE WALL REMOVAL/INSTALLATION [SKYACTIV-X 2.0].)
5. Disconnect the wiring harness clip of the HO2S. (See HEATED OXYGEN SENSOR (HO2S) REMOVAL/INSTALLATION [SKYACTIV-X 2.0].)
6. Disconnect the connector shown in the figure.
am3zzw00035762
|
7. Remove the bolts shown in the figure.
8. Remove the GPF pressure sensor.
am3zzw00035763
|
9. Install in the reverse order of removal.
