DTC P2463:00 [PCM (SKYACTIV-D)]

System malfunction location	Diesel particulate filter: Excess diesel particulate filter accumulation (large)
Detection condition	• Amount of accumulated soot exceeds 13 g/l because of diesel particulate filter clogging.
Fail-safe	• PCM restricts engine torque. • Inhibits the auto diesel particulate filter regeneration control. • Inhibits the DENOx/DESOx control. • Inhibits the EGR control.
Possible cause	• Pipe clogging or damage between exhaust gas pressure sensor No.2 and catalytic converter (diesel particulate filter) • Diesel particulate filter clogging or damage • PCM malfunction
System wiring diagram	• Not applicable
Connector diagram	• Not applicable

System malfunction location

Diesel particulate filter: Excess diesel particulate filter accumulation (large)

Detection condition

• Amount of accumulated soot exceeds 13 g/l because of diesel particulate filter clogging.

Fail-safe

• PCM restricts engine torque.

• Inhibits the auto diesel particulate filter regeneration control.

• Inhibits the DENOx/DESOx control.

• Inhibits the EGR control.

Possible cause

• Pipe clogging or damage between exhaust gas pressure sensor No.2 and catalytic converter (diesel particulate filter)

• Diesel particulate filter clogging or damage

• PCM malfunction

System wiring diagram

• Not applicable

Connector diagram

• Not applicable

Step	Inspection	Results	Action
1	RECORD VEHICLE STATUS WHEN DTC WAS DETECTED TO UTILIZE WITH REPEATABILITY VERIFICATION • Record the freeze frame data/snapshot data. Note • Recording can be facilitated using the screen capture function of the PC.	—	Go to the next step.
2	VERIFY RELATED REPAIR INFORMATION OR SERVICE INFORMATION AVAILABILITY • Verify related Service Bulletins, on-line repair information, or Service Information availability. • Is any related Information available?	Yes	Perform repair or diagnosis according to the available information. • If the vehicle is not repaired, go to the next step.
No	Go to the next step.
3	INSPECT EXHAUST GAS PRESSURE SENSOR No.2 RELATED PIPING • Inspect exhaust gas pressure sensor No.2-related piping for clogging, damage, and loss. (See EXHAUST GAS TEMPERATURE SENSOR INSPECTION [SKYACTIV-D 1.8].) • Is the exhaust gas pressure sensor No.2 piping normal?	Yes	Perform fuel injection amount learning and implement compulsory diesel particulate filter regeneration. (See FUEL INJECTOR INJECTION AMOUNT CORRECTION [SKYACTIV-D 1.8].) (See COMPULSORY DIESEL PARTICULATE FILTER REGENERATION [SKYACTIV-D 1.8].) Go to the next step. Note • If any of the following DTCs are stored, compulsory diesel particulate filter regeneration cannot be implemented due to the PCM control. • Perform applicable DTC troubleshooting then perform compulsory diesel particulate filter regeneration. • DTC P0093:00, P0102:00, P0103:00, P0107:00, P0108:00, P0112:00, P0113:00, P0117:00, P0118:00, P0201:00, P0202:00, P0203:00, P0204:00, P0313:00, P0337:00, P0406:00, P0500:00, P0545:00, P0546:00, P0605:00, P0606:00, P115A:00, P1378:00, P1379:00, P2032:00, P2033:00, P2146:00, P2147:00, P2148:00, P2149:00, P2150:00, P2151:00, P2228:00, P2229:00, P242C:00, P242D:00, P242F:00^, P2454:00, P2455:00, P2463:00^, P253F:00 *When a high quantity of soot has accumulated in the diesel particulate filter and the PCM has stored DTC P242F:00 or P2463:00, compulsory diesel particulate filter regeneration cannot be implemented.
No	Repair or replace the malfunctioning location, then go to repair completion verification.
4	VERIFY DTCs • Install/connect the part removed/disconnected during the troubleshooting procedure. • Clear the DTC recorded in the memory. (See CLEARING DTC.) • Replicate the vehicle conditions at the time the DTC was detected using the following procedure. Warning • To prevent an accident, work with another person when the vehicle is being driven (one person drives vehicle, other person operates M-MDS). • Observe legal speed limits when driving the vehicle and perform the procedure in a location where safety can be assured. • Perform the DTC inspection for the PCM. (See DTC INSPECTION.) • Is the same Pending DTC present?	Yes	Diesel particulate filter clogging in the catalytic converter (diesel particulate filter), damage, or loss can be considered. • Replace the catalytic converter (diesel particulate filter), then go to the next step. (See EXHAUST SYSTEM REMOVAL/INSTALLATION [SKYACTIV-D 1.8].)
No	Go to repair completion verification 2.
Repair completion verification 1	VERIFY THAT VEHICLE IS REPAIRED • Install/connect the part removed/disconnected during the troubleshooting procedure. • Clear the DTC recorded in the memory. (See CLEARING DTC.) • Replicate the vehicle conditions at the time the DTC was detected using the following procedure. Warning • To prevent an accident, work with another person when the vehicle is being driven (one person drives vehicle, other person operates M-MDS). • Observe legal speed limits when driving the vehicle and perform the procedure in a location where safety can be assured. ― Start the engine and drive the vehicle under the freeze frame data/snapshot data condition. • Perform the DTC inspection for the PCM. (See DTC INSPECTION.) • Is the same Pending DTC present?	Yes	Refer to the controller area network (CAN) malfunction diagnosis flow to inspect for a CAN communication error. (See CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW [(E)].) If the CAN communication is normal, perform the diagnosis from Step 1. • If the malfunction recurs, replace the PCM, then go to the next step. (See PCM REMOVAL/INSTALLATION [SKYACTIV-D 1.8].)
No	Go to the next step.
Repair completion verification 2	VERIFY IF OTHER DTCs DISPLAYED • Perform the DTC inspection. (See DTC INSPECTION.) • Are any other DTCs displayed?	Yes	Repair the malfunctioning location according to the applicable DTC troubleshooting.
No	DTC troubleshooting completed.

Step

Inspection

Results

Action

RECORD VEHICLE STATUS WHEN DTC WAS DETECTED TO UTILIZE WITH REPEATABILITY VERIFICATION

• Record the freeze frame data/snapshot data.

Note

• Recording can be facilitated using the screen capture function of the PC.

—

Go to the next step.

VERIFY RELATED REPAIR INFORMATION OR SERVICE INFORMATION AVAILABILITY

• Verify related Service Bulletins, on-line repair information, or Service Information availability.

• Is any related Information available?

Yes

Perform repair or diagnosis according to the available information.

• If the vehicle is not repaired, go to the next step.

Go to the next step.

INSPECT EXHAUST GAS PRESSURE SENSOR No.2 RELATED PIPING

• Inspect exhaust gas pressure sensor No.2-related piping for clogging, damage, and loss.

(See EXHAUST GAS TEMPERATURE SENSOR INSPECTION [SKYACTIV-D 1.8].)

• Is the exhaust gas pressure sensor No.2 piping normal?

Yes

Perform fuel injection amount learning and implement compulsory diesel particulate filter regeneration.

(See FUEL INJECTOR INJECTION AMOUNT CORRECTION [SKYACTIV-D 1.8].)

(See COMPULSORY DIESEL PARTICULATE FILTER REGENERATION [SKYACTIV-D 1.8].)

Go to the next step.

Note

• If any of the following DTCs are stored, compulsory diesel particulate filter regeneration cannot be implemented due to the PCM control.

• Perform applicable DTC troubleshooting then perform compulsory diesel particulate filter regeneration.

• DTC P0093:00, P0102:00, P0103:00, P0107:00, P0108:00, P0112:00, P0113:00, P0117:00, P0118:00, P0201:00, P0202:00, P0203:00, P0204:00, P0313:00, P0337:00, P0406:00, P0500:00, P0545:00, P0546:00, P0605:00, P0606:00, P115A:00, P1378:00, P1379:00, P2032:00, P2033:00, P2146:00, P2147:00, P2148:00, P2149:00, P2150:00, P2151:00, P2228:00, P2229:00, P242C:00, P242D:00, P242F:00^*, P2454:00, P2455:00, P2463:00^*, P253F:00

*When a high quantity of soot has accumulated in the diesel particulate filter and the PCM has stored DTC P242F:00 or P2463:00, compulsory diesel particulate filter regeneration cannot be implemented.

Repair or replace the malfunctioning location, then go to repair completion verification.

VERIFY DTCs

• Install/connect the part removed/disconnected during the troubleshooting procedure.

• Clear the DTC recorded in the memory.

(See CLEARING DTC.)

• Replicate the vehicle conditions at the time the DTC was detected using the following procedure.

Warning

• To prevent an accident, work with another person when the vehicle is being driven (one person drives vehicle, other person operates M-MDS).

• Observe legal speed limits when driving the vehicle and perform the procedure in a location where safety can be assured.

• Perform the DTC inspection for the PCM.

(See DTC INSPECTION.)

• Is the same Pending DTC present?

Yes

Diesel particulate filter clogging in the catalytic converter (diesel particulate filter), damage, or loss can be considered.

• Replace the catalytic converter (diesel particulate filter), then go to the next step.

(See EXHAUST SYSTEM REMOVAL/INSTALLATION [SKYACTIV-D 1.8].)

Go to repair completion verification 2.

Repair completion verification 1

VERIFY THAT VEHICLE IS REPAIRED

• Install/connect the part removed/disconnected during the troubleshooting procedure.

• Clear the DTC recorded in the memory.

(See CLEARING DTC.)

• Replicate the vehicle conditions at the time the DTC was detected using the following procedure.

Warning

• To prevent an accident, work with another person when the vehicle is being driven (one person drives vehicle, other person operates M-MDS).

• Observe legal speed limits when driving the vehicle and perform the procedure in a location where safety can be assured.

― Start the engine and drive the vehicle under the freeze frame data/snapshot data condition.

• Perform the DTC inspection for the PCM.

(See DTC INSPECTION.)

• Is the same Pending DTC present?

Yes

Refer to the controller area network (CAN) malfunction diagnosis flow to inspect for a CAN communication error.

(See CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW [(E)].)

If the CAN communication is normal, perform the diagnosis from Step 1.

• If the malfunction recurs, replace the PCM, then go to the next step.

(See PCM REMOVAL/INSTALLATION [SKYACTIV-D 1.8].)

Go to the next step.

Repair completion verification 2

VERIFY IF OTHER DTCs DISPLAYED

• Perform the DTC inspection.

(See DTC INSPECTION.)

• Are any other DTCs displayed?

Yes

Repair the malfunctioning location according to the applicable DTC troubleshooting.

DTC troubleshooting completed.

Mazdamanuals.com