 |
am3zzw00035648
THROTTLE BODY REMOVAL/INSTALLATION [SKYACTIV-X 2.0]
id0113hf802700
Replacement part
|
Gasket
Quantity: 1
Location of use: Throttle body
|
1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(E)].)
2. Open the engine cover. (See ENGINE COVER OPEN/CLOSE [SKYACTIV-X 2.0].)
3. Remove the left wall (front). (See SIDE WALL REMOVAL/INSTALLATION [SKYACTIV-X 2.0].)
4. Remove the following parts as a single unit. (See AIR CLEANER REMOVAL/INSTALLATION [SKYACTIV-X 2.0].)
5. Remove the resonance chamber. (See AIR CLEANER REMOVAL/INSTALLATION [SKYACTIV-X 2.0].)
6. Remove using the procedure shown in the figure.
am3zzw00035648
|
|
1
|
Throttle body connector
|
|
2
|
Water hose
(See Water Hose Removal Note.)
(See Water Hose Installation Note.)
|
|
3
|
Throttle body
|
7. Install in the reverse order of removal.
8. Add engine coolant. (See ENGINE COOLANT REPLACEMENT [SKYACTIV-X 2.0].)
Water Hose Removal Note
1. Disconnect the water hose from the throttle body and quickly plug the water hose.
Water Hose Installation Note
1. Install the water hose as shown in the figure.
am3zzw00035649
|
