Home

Mazdamanuals.com

FRESH-AIR DUCT VALVE POSITION SENSOR INSPECTION [SKYACTIV-X 2.0]

FRESH-AIR DUCT VALVE POSITION SENSOR INSPECTION [SKYACTIV-X 2.0]


 id0140hf866000


Vehicles With Fresh-air Duct Valve Actuator

Note
•  The fresh-air duct valve position sensor is built into the fresh-air duct. When replacing the fresh-air duct valve position sensor, replace it together with the fresh-air duct as a single unit.

PID/DATA Monitor Inspection

1.  Connect the M-MDS to the DLC-2.

2.  Display PID FRESH_AIR_DUCT_POS_ACT and simulation item FRESH_AIR_DUCT_POS_DSD using the M-MDS. (See PID/DATA MONITOR INSPECTION.)(See PID/DATA MONITOR TABLE [PCM (SKYACTIV-X)].)(See SIMULATION INSPECTION.)(See SIMULATION TABLE [PCM (SKYACTIV-X)].)

3.  Verify that the PID FRESH_AIR_DUCT_POS_ACT value conforms to the simulation item FRESH_AIR_DUCT_POS_DSD value when simulation item FRESH_AIR_DUCT_POS_DSD is driven from 0 the maximum value.

•  If they cannot be verified, replace the fresh-air duct. (See AIR CLEANER REMOVAL/INSTALLATION [SKYACTIV-X 2.0].)