49 D015 001
Socket wrench
WATER PRESSURE SENSOR REMOVAL/INSTALLATION [SKYACTIV-X 2.0]
id0140hf895000
Special service tool (SST)
|
49 D015 001
Socket wrench
|
|
1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(E)])
2. Remove the engine cover. (See ENGINE COVER REMOVAL/INSTALLATION [SKYACTIV-X 2.0].)
3. Drain the engine coolant. (See ENGINE COOLANT REPLACEMENT [SKYACTIV-X 2.0])
4. Remove the left wall (rear). (See SIDE WALL REMOVAL/INSTALLATION [SKYACTIV-X 2.0])
5. Remove rear wall. (See SIDE WALL REMOVAL/INSTALLATION [SKYACTIV-X 2.0])
6. Disconnect the water pressure sensor connector.
am3zzw00035766
|
7. Remove the water pressure sensor.
am3zzw00035767
|
8. Install in the reverse order of removal.
9. Add engine coolant. (See ENGINE COOLANT REPLACEMENT [SKYACTIV-X 2.0])
