Home

Mazdamanuals.com

BUCKLE SWITCH INSPECTION [(E)]

BUCKLE SWITCH INSPECTION [(E)]

 id0811008030x2


Front

1.  Switch the ignition off.

2.  Disconnect the negative battery terminal and wait for 1 min or more. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(E)].)

3.  Remove the front seat. (See FRONT SEAT REMOVAL/INSTALLATION [(E)].)

4.  Remove the front buckle. (See FRONT BUCKLE REMOVAL/INSTALLATION [(E)].)

5.  Inspect for continuity between the buckle switch terminals using a tester.

ac30zw00001646

•  If not as indicated in the table, replace the front buckle.
ac30zw00001647


Rear

1.  Switch the ignition off.

2.  Disconnect the negative battery terminal and wait for 1 min or more. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(E)].)

3.  Remove the rear seat cushion. (See REAR SEAT CUSHION REMOVAL/INSTALLATION.)

4.  Remove the rear buckle. (See REAR BUCKLE REMOVAL/INSTALLATION.)

5.  Inspect for continuity between the buckle switch terminals using a tester.

am3zzw00022959

•  If not as indicated in the table, replace the rear buckle.
ac30zw00001648