METER HOOD REMOVAL/INSTALLATION
METER HOOD REMOVAL/INSTALLATION
id091700800900
1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(E)].)
2. Remove the following parts:
- (1) Driver-side front scuff plate (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)
-
- (2) Driver-side front side trim (See FRONT SIDE TRIM REMOVAL/INSTALLATION.)
-
- (3) Driver-side decoration panel (See DECORATION PANEL REMOVAL/INSTALLATION.)
-
- (4) Passenger-side decoration panel (See DECORATION PANEL REMOVAL/INSTALLATION.)
-
- (5) Driver-side lower panel (See LOWER PANEL REMOVAL/INSTALLATION [(E)].)
-
- (6) Upper column cover (See COLUMN COVER REMOVAL/INSTALLATION.)
-
- (7) Instrument cluster (See INSTRUMENT CLUSTER REMOVAL/INSTALLATION.)
-
3. Remove the screws.
4. Disconnect the connectors.
5. Remove the meter hood from the instrument cluster.
6. Install in the reverse order of removal.