Home

Mazdamanuals.com

 DTC TABLE [IMMOBILIZER SYSTEM (ADVANCED KEYLESS SYSTEM)]

DTC TABLE [IMMOBILIZER SYSTEM (ADVANCED KEYLESS SYSTEM)]


id0902i8837000

DTC

Description

Page

Security light

Security light flashing pattern

Keyless warning light

WDS or equivalent

Keyless control module

PCM

11

Not illuminated
-
B1681
Communication error between the keyless control module and the PCM.
Illuminated
B1681
B1681
Communication error between the keyless control module and the coil antenna.
12

Illuminated
B2103
B2103
Coil Antenna failure.
13

Not illuminated
-
B1600
ID number signal is not received.
-
B2431
ID number signal is not received.
14

Not illuminated
-
B1602
PCM received invalid format of ID number from transponder.
15

Not illuminated
-
B1601
PCM received incorrect ID number from key (transponder).
Illuminated
B1342
B1601
Keyless control module malfunction.
21

Not illuminated
B1213
B1213
Number of valid keys is below minimum. (PCM)
-
-
Illuminated
B1213
-
Number of valid keys is below minimum. (keyless control module)
-
-
Illuminated
U0073
U0073
CAN system malfunction.
-
-
Not illuminated
U0323
U0100
U2023
U0323
U0100
U2023
CAN system malfunction.

Note
• Perform the following if the security light stays on:
- If engine stalls, go to symptom troubleshooting NO.11 "ENGINE STALLS/QUITS, ENGINE RUNS ROUGH, MISSES, BUCK/JERK, HESITATION/STUMBLE, SURGES" in.
(See NO.11 ENGINE STALLS/QUITS, ENGINE RUNS ROUGH, MISSES, BUCK/JERK, HESITATION/STUMBLE, SURGES [L8, LF, L3].)
(See NO.13 ENGINE STALLS/QUITS, ENGINE RUNS ROUGH, MISSES, BUCK/JERK, HESITATION/STUMBLE, SURGES [MZR-CD (RF Turbo)].)
- If engine won't start, go to symptom troubleshooting NO.6 "CRANKS NORMALLY BUT WILL NOT START" in. (See NO.6 CRANKS NORMALLY BUT WILL NOT START [L8, LF, L3].)
(SeeNO.8 CRANKS NORMALLY BUT WILL NOT START [MZR-CD (RF Turbo)].)