DTC TABLE [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)]

• The SRS air bag system can be identified by whether or not the seat track position sensor is present.

― Standard deployment control system: Without seat track position sensor

― Two-step deployment control system: With seat track position sensor

DTC	System malfunction location	Air bag system warning light	Fail safe	Drive cycle	Self test type^*1	Memory function	Page
B0001:11	Driver-side air bag module (inflator No.1) circuit short to body ground	Illuminated	—	—	C, D	×	(See DTC B0001:11, B0001:12, B0001:13, B0001:19 OR B0001:1A [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
B0001:12	Driver-side air bag module (inflator No.1) circuit short to power supply	Illuminated	—	—	C, D	×
B0001:13	Driver-side air bag module (inflator No.1) circuit open circuit or resistance high	Illuminated	—	—	C, D	×
B0001:19	Short circuit to driver-side air bag module (inflator No.1) and other air bag module circuits	Illuminated	—	—	C, D	×
B0001:1A	Driver-side air bag module (inflator No.1) circuit resistance low	Illuminated	—	—	C, D	×
B0001:55	Configuration setting error (driver-side air bag module (inflator No.1) structural malfunction)	Illuminated	—	—	C, D	×	(See DTC B0001:55 OR B0010:55 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
B0002:11	Driver-side air bag module (inflator No.2) circuit short to body ground	Illuminated	—	—	C, D	×	(See DTC B0002:11, B0002:12, B0002:13, B0002:19 OR B0002:1A [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
B0002:12	Driver-side air bag module (inflator No.2) circuit short to power supply	Illuminated	—	—	C, D	×
B0002:13	Driver-side air bag module (inflator No.2) circuit open circuit or resistance high	Illuminated	—	—	C, D	×
B0002:19	Short circuit to driver-side air bag module (inflator No.2) and other air bag module circuits	Illuminated	—	—	C, D	×
B0002:1A	Driver-side air bag module (inflator No.2) circuit resistance low	Illuminated	—	—	C, D	×
B0002:55	Configuration setting error (driver-side air bag module (inflator No.2) structural malfunction)	Illuminated	—	—	C, D	×	(See DTC B0002:55 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
B0003:53	Operation (deployment) inhibited	Flash	—	—	C, D	×	(See DTC B0003:53 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
B0004:11	Driver-side knee air bag module circuit short to body ground	Illuminated	—	—	C, D	×	(See DTC B0004:11, B0004:12, B0004:13, B0004:19 OR B0004:1A [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
B0004:12	Driver-side knee air bag module circuit short to power supply	Illuminated	—	—	C, D	×
B0004:13	Driver-side knee air bag module circuit open circuit or resistance high	Illuminated	—	—	C, D	×
B0004:19	Short circuit to driver-side knee air bag module and other air bag module circuits	Illuminated	—	—	C, D	×
B0004:1A	Driver-side knee air bag module circuit resistance low	Illuminated	—	—	C, D	×
B0004:55	Configuration setting error (driver-side knee air bag module structural malfunction)	Illuminated	—	—	C, D	×	(See DTC B0004:55 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
B0010:11	Passenger-side air bag module (inflator No.1) circuit short to body ground	Illuminated	—	—	C, D	×	(See DTC B0010:11, B0010:12, B0010:13, B0010:19 OR B0010:1A [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
B0010:12	Passenger-side air bag module (inflator No.1) circuit short to power supply	Illuminated	—	—	C, D	×
B0010:13	Passenger-side air bag module (inflator No.1) circuit open circuit or resistance high	Illuminated	—	—	C, D	×
B0010:19	Short circuit to passenger-side air bag module (inflator No.1) and other air bag module circuits	Illuminated	—	—	C, D	×
B0010:1A	Passenger-side air bag module (inflator No.1) circuit resistance low	Illuminated	—	—	C, D	×
B0010:55	Configuration setting error (passenger-side air bag module (inflator No.1) structural malfunction)	Illuminated	—	—	C, D	×	(See DTC B0001:55 OR B0010:55 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
[B0011:11]	Passenger-side air bag module (inflator No.2) circuit short to body ground	Illuminated	—	—	C, D	×	(See Inspection For DTCs Not Usually Displayed so The Related Function is Not Equipped.)
[B0011:12]	Passenger-side air bag module (inflator No.2) circuit short to power supply	Illuminated	—	—	C, D	×
[B0011:13]	Passenger-side air bag module (inflator No.2) circuit open circuit or resistance high	Illuminated	—	—	C, D	×
[B0011:19]	Short circuit to passenger-side air bag module (inflator No.2) and other air bag module circuits	Illuminated	—	—	C, D	×
[B0011:1A]	Passenger-side air bag module (inflator No.2) circuit resistance low	Illuminated	—	—	C, D	×
[B0011:55]	Configuration setting error (passenger-side air bag module (inflator No.2) structural malfunction)	Illuminated	—	—	C, D	×
[B0013:11]	Passenger-side knee air bag module circuit short to body ground	Illuminated	—	—	C, D	×
[B0013:12]	Passenger-side knee air bag module circuit short to power supply	Illuminated	—	—	C, D	×
[B0013:13]	Passenger-side knee air bag module circuit open circuit or resistance high	Illuminated	—	—	C, D	×
[B0013:19]	Short circuit to passenger-side knee air bag module and other air bag module circuits	Illuminated	—	—	C, D	×
[B0013:1A]	Passenger-side knee air bag module circuit resistance low	Illuminated	—	—	C, D	×
[B0013:55]	Configuration setting error (passenger-side knee air bag module structural malfunction)	Illuminated	—	—	C, D	×
[B0052:09]	Passenger-side buckle switch internal malfunction	Illuminated	—	—	C, D	×
[B0052:11]	Passenger-side buckle switch circuit open circuit or short to power supply	Illuminated	—	—	C, D	×
[B0052:14]	Passenger-side buckle switch circuit short to body ground	Illuminated	—	—	C, D	×
[B0094:11]	Crash zone sensor (center) circuit short to body ground or power supply	Illuminated	—	—	C, D	×	(See Inspection For DTCs Not Usually Displayed so The Related Function is Not Equipped.)
[B0094:13]	Crash zone sensor (center) circuit open circuit or short to power supply	Illuminated	—	—	C, D	×
[B0094:87]	Signal reception error from crash zone sensor (center)	Illuminated	—	—	C, D	×
[B0094:96]	Crash zone sensor (center) internal malfunction	Illuminated	—	—	C, D	×
[B0094:55]	Configuration setting error (crash zone sensor (center) structural malfunction)	Illuminated	—	—	C, D	×
[B0095:11]	Crash zone sensor (center) circuit short to body ground or power supply	Illuminated	—	—	C, D	×
[B0095:13]	Crash zone sensor (center) circuit open circuit or short to power supply	Illuminated	—	—	C, D	×
[B0095:87]	Signal reception error from crash zone sensor (center)	Illuminated	—	—	C, D	×
[B0095:96]	Crash zone sensor (center) internal malfunction	Illuminated	—	—	C, D	×
[B0095:55]	Configuration setting error (crash zone sensor (center) structural malfunction)	Illuminated	—	—	C, D	×
[B00A0:07]	Seat weight sensor control module mechanical malfunction	Illuminated	—	—	C, D	×
[B00A0:09]	Seat weight sensor control module signal output unstable	Illuminated	—	—	C, D	×
[B00A0:1C]	Seat weight sensor control module power supply circuit open	Illuminated	—	—	C, D	×
[B00A0:28]	Seat weight sensor control module calibration setting invalid	Illuminated	—	—	D	×
[B00A0:4A]	Seat weight sensor control module ID mismatch	Illuminated	—	—	C, D	×
[B00A0:54]	Seat weight sensor control module calibration error	Illuminated	—	—	C, D	×
[B00A0:81]	Seat weight sensor control module invalid serial data received	Illuminated	—	—	C, D	×
[B00A0:87]	No signal received from seat weight sensor control module	Illuminated	—	—	C, D	×
[B00A0:8F]	Seat weight sensor control module communication error	Illuminated	—	—	C, D	×
B00B5:11	Seat track position sensor circuit short to body ground	Illuminated	—	—	C, D	×	(See DTC B00B5:11, B00B5:12, B00B5:13 OR B00B5:1D [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
B00B5:12	Seat track position sensor circuit short to power supply	Illuminated	—	—	C, D	×
B00B5:13	Seat track position sensor circuit open	Illuminated	—	—	C, D	×
B00B5:1D	Seat track position sensor circuit current out of range	Illuminated	—	—	C, D	×
B00B5:55	Configuration setting error (seat track position sensor structural malfunction)	Illuminated	—	—	C, D	×	(See DTC B00B5:55 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
[B00C0:93]	Seat weight sensor (FL) malfunction	Illuminated	—	—	C, D	×	(See Inspection For DTCs Not Usually Displayed so The Related Function is Not Equipped.)
[B00C1:93]	Seat weight sensor (FR) malfunction	Illuminated	—	—	C, D	×
[B00C2:93]	Seat weight sensor (RL) malfunction	Illuminated	—	—	C, D	×
[B00C3:93]	Seat weight sensor (RR) malfunction	Illuminated	—	—	C, D	×
B00D2:01	Air bag system warning light malfunction	—	—	—	C, D	×	(See DTC B00D2:01 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
B00D2:29	Communication error with instrument cluster (air bag system warning light status mis-matched)	—	—	—	C, D	×	(See DTC B00D2:29 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
B00D5:01	PAD OFF indicator circuit open circuit or short to power supply	Illuminated	—	—	C, D	×	(See DTC B00D5:01 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
B00D5:29	Communication error with instrument cluster (PAD indicator light status mis-matched)	Illuminated	—	—	C, D	×	(See DTC B00D5:29 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
B1011:95	SAS control module connectors are poorly connected	Illuminated	—	—	C, D	×	(See DTC B1011:95 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
B10FD:11	Driver-side side air bag sensor circuit short to body ground or power supply	Illuminated	—	—	C, D	×	(See DTC B10FD:11, B10FD:13, B10FD:87 OR B10FD:96 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
B10FD:13	Driver-side side air bag sensor circuit open circuit or resistance high or short to power supply	Illuminated	—	—	C, D	×
B10FD:87	Signal reception error from driver-side side air bag sensor	Illuminated	—	—	C, D	×
B10FD:96	Driver-side side air bag sensor internal malfunction	Illuminated	—	—	C, D	×
B10FD:55	Configuration setting error (driver-side side air bag sensor structural malfunction)	Illuminated	—	—	C, D	×	(See DTC B10FD:55 OR B10FE:55 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
B10FE:11	Passenger-side side air bag sensor circuit short to body ground or power supply	Illuminated	—	—	C, D	×	(See DTC B10FE:11, B10FE:13, B10FE:87 OR B10FE:96 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
B10FE:13	Passenger-side side air bag sensor circuit open circuit or resistance high or short to power supply	Illuminated	—	—	C, D	×
B10FE:87	Signal reception error from passenger-side side air bag sensor	Illuminated	—	—	C, D	×
B10FE:96	Passenger-side side air bag sensor internal malfunction	Illuminated	—	—	C, D	×
B10FE:55	Configuration setting error (passenger-side side air bag sensor structural malfunction)	Illuminated	—	—	C, D	×	(See DTC B10FD:55 OR B10FE:55 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
B1126:11	Driver-side side air bag module circuit short to body ground	Illuminated	—	—	C, D	×	(See DTC B1126:11, B1126:12, B1126:13, B1126:19 OR B1126:1A [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
B1126:12	Driver-side side air bag module circuit short to power supply	Illuminated	—	—	C, D	×
B1126:13	Driver-side side air bag module circuit open circuit or resistance high	Illuminated	—	—	C, D	×
B1126:19	Short circuit to driver-side side air bag module and other air bag module circuits	Illuminated	—	—	C, D	×
B1126:1A	Driver-side side air bag module circuit resistance low	Illuminated	—	—	C, D	×
B1126:55	Configuration setting error (driver-side side air bag module structural malfunction)	Illuminated	—	—	C, D	×	(See DTC B1126:55 OR B1127:55 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
B1127:11	Passenger-side side air bag module circuit short to body ground	Illuminated	—	—	C, D	×	(See DTC B1127:11, B1127:12, B1127:13, B1127:19 OR B1127:1A [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
B1127:12	Passenger-side side air bag module circuit short to power supply	Illuminated	—	—	C, D	×
B1127:13	Passenger-side side air bag module circuit open circuit or resistance high	Illuminated	—	—	C, D	×
B1127:19	Short circuit to passenger-side side air bag module and other air bag module circuits	Illuminated	—	—	C, D	×
B1127:1A	Passenger-side side air bag module circuit resistance low	Illuminated	—	—	C, D	×
B1127:55	Configuration setting error (passenger-side side air bag module structural malfunction)	Illuminated	—	—	C, D	×	(See DTC B1126:55 OR B1127:55 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
B1128:11	Driver-side curtain air bag module circuit short to body ground	Illuminated	—	—	C, D	×	(See DTC B1128:11, B1128:12, B1128:13, B1128:19 OR B1128:1A [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
B1128:12	Driver-side curtain air bag module circuit short to power supply	Illuminated	—	—	C, D	×
B1128:13	Driver-side curtain air bag module circuit open circuit or resistance high	Illuminated	—	—	C, D	×
B1128:19	Short circuit to driver-side curtain air bag module and other air bag module circuits	Illuminated	—	—	C, D	×
B1128:1A	Driver-side curtain air bag module circuit resistance low	Illuminated	—	—	C, D	×
B1128:55	Configuration setting error (driver-side curtain air bag module structural malfunction)	Illuminated	—	—	C, D	×	(See DTC B1128:55 OR B1129:55 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
B1129:11	Passenger-side curtain air bag module circuit short to body ground	Illuminated	—	—	C, D	×	(See DTC B1129:11, B1129:12, B1129:13, B1129:19 OR B1129:1A [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
B1129:12	Passenger-side curtain air bag module circuit short to power supply	Illuminated	—	—	C, D	×
B1129:13	Passenger-side curtain air bag module circuit open circuit or resistance high	Illuminated	—	—	C, D	×
B1129:19	Short circuit to passenger-side curtain air bag module and other air bag module circuits	Illuminated	—	—	C, D	×
B1129:1A	Passenger-side curtain air bag module circuit resistance low	Illuminated	—	—	C, D	×
B1129:55	Configuration setting error (passenger-side curtain air bag module structural malfunction)	Illuminated	—	—	C, D	×	(See DTC B1128:55 OR B1129:55 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
B1193:00	SAS control module operation (deployment)	Illuminated	—	—	C, D	×	(See DTC B1193:00 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
[B1196:11]	Driver-side side air bag sensor No.2 circuit short to body ground or short to power supply	Illuminated	—	—	C, D	×	(See Inspection For DTCs Not Usually Displayed so The Related Function is Not Equipped.)
[B1196:13]	Driver-side side air bag sensor No.2 circuit open circuit or short to power supply	Illuminated	—	—	C, D	×
[B1196:55]	Configuration setting error (driver-side side air bag sensor No.2 structural malfunction)	Illuminated	—	—	C, D	×
[B1196:87]	Signal reception error from driver-side side air bag sensor No.2	Illuminated	—	—	C, D	×
[B1196:96]	Driver-side side air bag sensor No.2 internal malfunction	Illuminated	—	—	C, D	×
[B1197:11]	Passenger-side side air bag sensor No.2 circuit short to body ground or short to power supply	Illuminated	—	—	C, D	×
[B1197:13]	Passenger-side side air bag sensor No.2 circuit open circuit or short to power supply	Illuminated	—	—	C, D	×
[B1197:55]	Configuration setting error (passenger-side side air bag sensor No.2 structural malfunction)	Illuminated	—	—	C, D	×
[B1197:87]	Signal reception error from passenger-side side air bag sensor No.2	Illuminated	—	—	C, D	×
[B1197:96]	Passenger-side side air bag sensor No.2 internal malfunction	Illuminated	—	—	C, D	×
[B1202:01]	Passenger air bag deactivation (PAD) indicator malfunction	Illuminated	—	—	C, D	×
B1206:00	SAS control module collision judgment signal output (fuel cut signal output)	—	—	—	C, D	×	(See DTC B1206:00, B143A:00, B1A55:00 OR U2107:00 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
B1211:11	Driver-side front pre-tensioner seat belt circuit short to body ground	Illuminated	—	—	C, D	×	(See DTC B1211:11, B1211:12, B1211:13, B1211:19 OR B1211:1A [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
B1211:12	Driver-side front pre-tensioner seat belt circuit short to power supply	Illuminated	—	—	C, D	×
B1211:13	Driver-side front pre-tensioner seat belt circuit open circuit or resistance high	Illuminated	—	—	C, D	×
B1211:19	Short circuit to driver-side front pre-tensioner seat belt and other air bag module circuits	Illuminated	—	—	C, D	×
B1211:1A	Driver-side front pre-tensioner seat belt circuit resistance low	Illuminated	—	—	C, D	×
B1211:55	Configuration setting error (driver-side front pre-tensioner seat belt structural malfunction)	Illuminated	—	—	C, D	×	(See DTC B1211:55 OR B1214:55 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
B1212:00	Communication error with driver’s side buckle switch (no response or error data received)	Illuminated	—	—	C, D	×	(See DTC B1212:00 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
B1214:11	Passenger-side front pre-tensioner seat belt circuit short to body ground	Illuminated	—	—	C, D	×	(See DTC B1214:11, B1214:12, B1214:13, B1214:19 OR B1214:1A [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
B1214:12	Passenger-side front pre-tensioner seat belt circuit short to power supply	Illuminated	—	—	C, D	×
B1214:13	Passenger-side front pre-tensioner seat belt circuit open circuit or resistance high	Illuminated	—	—	C, D	×
B1214:19	Short circuit to passenger-side front pre-tensioner seat belt and other air bag module circuits	Illuminated	—	—	C, D	×
B1214:1A	Passenger-side front pre-tensioner seat belt circuit resistance low	Illuminated	—	—	C, D	×
B1214:55	Configuration setting error (passenger-side front pre-tensioner seat belt structural malfunction)	Illuminated	—	—	C, D	×	(See DTC B1211:55 OR B1214:55 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
B1226:11	Driver-side pressure sensor circuit short to body ground	Illuminated	—	—	C, D	×	(See DTC B1226:11, B1226:13, B1226:87 OR B1226:96 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
B1226:13	Driver-side pressure sensor circuit open circuit or short to power supply	Illuminated	—	—	C, D	×
B1226:87	Signal reception error from driver-side pressure sensor	Illuminated	—	—	C, D	×
B1226:96	Driver-side pressure sensor internal malfunction	Illuminated	—	—	C, D	×
B1226:55	Configuration setting error (driver-side pressure sensor structural malfunction)	Illuminated	—	—	C, D	×	(See DTC B1226:55 OR B1227:55 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
B1227:11	Passenger-side pressure sensor circuit short to body ground	Illuminated	—	—	C, D	×	(See DTC B1227:11, B1227:13, B1227:87 OR B1227:96 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
B1227:13	Passenger-side pressure sensor circuit open circuit or short to power supply	Illuminated	—	—	C, D	×
B1227:87	Signal reception error from passenger-side pressure sensor	Illuminated	—	—	C, D	×
B1227:96	Passenger-side pressure sensor internal malfunction	Illuminated	—	—	C, D	×
B1227:55	Configuration setting error (passenger-side pressure sensor structural malfunction)	Illuminated	—	—	C, D	×	(See DTC B1226:55 OR B1227:55 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
B1410:11	Driver-side rear pre-tensioner seat belt circuit short to body ground	Illuminated	—	—	C, D	×	(See DTC B1410:11, B1410:12, B1410:13, B1410:19 OR B1410:1A [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
B1410:12	Driver-side rear pre-tensioner seat belt circuit short to power supply	Illuminated	—	—	C, D	×
B1410:13	Driver-side rear pre-tensioner seat belt circuit open circuit or resistance high	Illuminated	—	—	C, D	×
B1410:19	Short circuit to driver-side rear pre-tensioner seat belt and other air bag module circuits	Illuminated	—	—	C, D	×
B1410:1A	Driver-side rear pre-tensioner seat belt circuit resistance low	Illuminated	—	—	C, D	×
B1410:55	Configuration setting error (driver-side rear pre-tensioner seat belt structural malfunction)	Illuminated	—	—	C, D	×	(See DTC B1410:55 OR B1412:55 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
B1412:11	Passenger-side rear pre-tensioner seat belt circuit short to body ground	Illuminated	—	—	C, D	×	(See DTC B1412:11, B1412:12, B1412:13, B1412:19 OR B1412:1A [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
B1412:12	Passenger-side rear pre-tensioner seat belt circuit short to power supply	Illuminated	—	—	C, D	×
B1412:13	Passenger-side rear pre-tensioner seat belt circuit open circuit or resistance high	Illuminated	—	—	C, D	×
B1412:19	Short circuit to passenger-side rear pre-tensioner seat belt and other air bag module circuits	Illuminated	—	—	C, D	×
B1412:1A	Passenger-side rear pre-tensioner seat belt circuit resistance low	Illuminated	—	—	C, D	×
B1412:55	Configuration setting error (passenger-side rear pre-tensioner seat belt structural malfunction)	Illuminated	—	—	C, D	×	(See DTC B1410:55 OR B1412:55 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
B1413:11	Driver-side crash zone sensor circuit short to body ground or power supply	Illuminated	—	—	C, D	×	(See DTC B1413:11, B1413:13, B1413:87 OR B1413:96 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
B1413:13	Driver-side crash zone sensor circuit open circuit or short to power supply	Illuminated	—	—	C, D	×
B1413:87	Signal reception error from driver-side crash zone sensor	Illuminated	—	—	C, D	×
B1413:96	Driver-side crash zone sensor internal malfunction	Illuminated	—	—	C, D	×
B1413:55	Configuration setting error (driver-side crash zone sensor structural malfunction)	Illuminated	—	—	C, D	×	(See DTC B1413:55 OR B1417:55 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
B1417:11	Passenger-side crash zone sensor circuit short to body ground or power supply	Illuminated	—	—	C, D	×	(See DTC B1417:11, B1417:13, B1417:87 OR B1417:96 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
B1417:13	Passenger-side crash zone sensor circuit open circuit or short to power supply	Illuminated	—	—	C, D	×
B1417:87	Signal reception error from passenger-side crash zone sensor	Illuminated	—	—	C, D	×
B1417:96	Passenger-side crash zone sensor internal malfunction	Illuminated	—	—	C, D	×
B1417:55	Configuration setting error (passenger-side crash zone sensor structural malfunction)	Illuminated	—	—	C, D	×	(See DTC B1413:55 OR B1417:55 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
B143A:00	SAS control module collision judgment signal output (collision detection signal output)	—	—	—	C, D	×	(See DTC B1206:00, B143A:00, B1A55:00 OR U2107:00 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
[B1500:11]	Driver-side far side air bag module circuit short to body ground	Illuminated	—	—	C, D	×	(See Inspection For DTCs Not Usually Displayed so The Related Function is Not Equipped.)
[B1500:12]	Driver-side far side air bag module circuit short to power supply	Illuminated	—	—	C, D	×
[B1500:13]	Driver-side far side air bag module circuit open circuit or resistance high	Illuminated	—	—	C, D	×
[B1500:19]	Short circuit to driver-side far side air bag module circuit and other air bag module circuits	Illuminated	—	—	C, D	×
[B1500:1A]	Driver-side far side air bag module circuit resistance low	Illuminated	—	—	C, D	×
[B1500:55]	Configuration setting error (driver-side far side air bag module structural malfunction)	Illuminated	—	—	C, D	×
[B1501:11]	Driver-side rear side air bag module circuit short to body ground	Illuminated	—	—	C, D	×
[B1501:12]	Driver-side rear side air bag module circuit short to power supply	Illuminated	—	—	C, D	×
[B1501:13]	Driver-side rear side air bag module circuit open circuit or resistance high	Illuminated	—	—	C, D	×
[B1501:19]	Short circuit to driver-side rear side air bag module circuit and other air bag module circuits	Illuminated	—	—	C, D	×
[B1501:1A]	Driver-side rear side air bag module circuit resistance low	Illuminated	—	—	C, D	×
[B1501:55]	Configuration setting error (driver-side rear side air bag module structural malfunction)	Illuminated	—	—	C, D	×
[B1502:11]	Passenger-side rear side air bag module circuit short to body ground	Illuminated	—	—	C, D	×
[B1502:12]	Passenger-side rear side air bag module circuit short to power supply	Illuminated	—	—	C, D	×
[B1502:13]	Passenger-side rear side air bag module circuit open circuit or resistance high	Illuminated	—	—	C, D	×
[B1502:19]	Short circuit to passenger-side rear side air bag module circuit and other air bag module circuits	Illuminated	—	—	C, D	×
[B1502:1A]	Passenger-side rear side air bag module circuit resistance low	Illuminated	—	—	C, D	×
[B1502:55]	Configuration setting error (passenger-side rear side air bag module structural malfunction)	Illuminated	—	—	C, D	×
B1A55:00	SAS control module collision judgment signal output (collision detection signal output)	—	—	—	C, D	×	(See DTC B1206:00, B143A:00, B1A55:00 OR U2107:00 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
B1D75:55	Configuration setting error (passenger air bag deactivation switch structural malfunction)	Illuminated	—	—	C, D	×	(See DTC B1D75:55 OR B1D75:62 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
B1D75:62	Passenger air bag deactivation switch circuit open circuit or short to body ground	Illuminated	—	—	C, D	×
C0061:29	Low-G sensor (lateral-G) in SAS control module (internal circuit disabled)	—	—	—	C, D	×	(See DTC C0061:29, C0062:29, C0063:29 OR P0666:29 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
C0062:29	Low-G sensor (forward-G) in SAS control module (internal circuit disabled)	—	—	—	C, D	×
C0063:29	Yaw rate sensor in SAS control module (internal circuit disabled)	—	—	—	C, D	×
P0666:29	Temperature sensor in SAS control module (internal circuit disabled)	—	—	—	C, D	×
P160A:00	Configuration data unmatched with body control module (BCM)	Illuminated	—	—	C, D	×	(See DTC P160A:00 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
U0001:88	Unit communication error (HS-CAN)	Illuminated	—	—	C, D	×	(See DTC U0001:88 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
U0140:00	Communication error with body control module (BCM)	Illuminated	—	—	C, D	×	(See DTC U0140:00 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
U0155:00	Communication error with instrument cluster	Illuminated	—	—	C, D	×	(See DTC U0155:00 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
U0155:41	Communication error with instrument cluster (check sum error)	Illuminated	—	—	C, D	×	(See DTC U0155:41 OR U0155:82 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
U0155:82	Communication error with instrument cluster (counter error)	Illuminated	—	—	C, D	×
U0156:00	Communication error with instrument cluster	Illuminated	—	—	C, D	×	(See DTC U0156:00 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
U0156:41	Communication error with instrument cluster (check sum error)	Illuminated	—	—	C, D	×	(See DTC U0156:41 OR U0156:82 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
U0156:82	Communication error with instrument cluster (counter error)	Illuminated	—	—	C, D	×
U0300:00	Configuration setting invalid	Illuminated	—	—	C, D	×	(See DTC U0300:00 OR U2100:00 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
U2005:68	PCM communication error (vehicle speed signal)	Illuminated	—	—	C, D	×	(See DTC U2005:68 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
U2100:00	Configuration not set	Flash	—	—	C, D	×	(See DTC U0300:00 OR U2100:00 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
U2107:00	SAS control module collision judgment signal output (secondary collision reduction request signal output)	—	—	—	C, D	×	(See DTC B1206:00, B143A:00, B1A55:00 OR U2107:00 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
U3000:49	SAS control module internal malfunction	Illuminated	—	—	C, D	×	(See DTC U3000:49 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
U3003:16	SAS control module power supply voltage decreases (8 V or less)	Illuminated	—	—	C, D	×	(See DTC U3003:16 OR U3003:17 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
U3003:17	SAS control module power supply voltage increases (18 V or more)	Illuminated	—	—	C, D	×

DTC

System malfunction location

Air bag system warning light

Fail safe

Drive cycle

Self test type^*1

Memory function

Page

B0001:11

Driver-side air bag module (inflator No.1) circuit short to body ground

Illuminated

—

C, D

(See DTC B0001:11, B0001:12, B0001:13, B0001:19 OR B0001:1A [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

B0001:12

Driver-side air bag module (inflator No.1) circuit short to power supply

Illuminated

—

C, D

B0001:13

Driver-side air bag module (inflator No.1) circuit open circuit or resistance high

Illuminated

—

C, D

B0001:19

Short circuit to driver-side air bag module (inflator No.1) and other air bag module circuits

Illuminated

—

C, D

B0001:1A

Driver-side air bag module (inflator No.1) circuit resistance low

Illuminated

—

C, D

B0001:55

Configuration setting error (driver-side air bag module (inflator No.1) structural malfunction)

Illuminated

—

C, D

(See DTC B0001:55 OR B0010:55 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

B0002:11

Driver-side air bag module (inflator No.2) circuit short to body ground

Illuminated

—

C, D

(See DTC B0002:11, B0002:12, B0002:13, B0002:19 OR B0002:1A [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

B0002:12

Driver-side air bag module (inflator No.2) circuit short to power supply

Illuminated

—

C, D

B0002:13

Driver-side air bag module (inflator No.2) circuit open circuit or resistance high

Illuminated

—

C, D

B0002:19

Short circuit to driver-side air bag module (inflator No.2) and other air bag module circuits

Illuminated

—

C, D

B0002:1A

Driver-side air bag module (inflator No.2) circuit resistance low

Illuminated

—

C, D

B0002:55

Configuration setting error (driver-side air bag module (inflator No.2) structural malfunction)

Illuminated

—

C, D

(See DTC B0002:55 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

B0003:53

Operation (deployment) inhibited

Flash

—

C, D

(See DTC B0003:53 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

B0004:11

Driver-side knee air bag module circuit short to body ground

Illuminated

—

C, D

(See DTC B0004:11, B0004:12, B0004:13, B0004:19 OR B0004:1A [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

B0004:12

Driver-side knee air bag module circuit short to power supply

Illuminated

—

C, D

B0004:13

Driver-side knee air bag module circuit open circuit or resistance high

Illuminated

—

C, D

B0004:19

Short circuit to driver-side knee air bag module and other air bag module circuits

Illuminated

—

C, D

B0004:1A

Driver-side knee air bag module circuit resistance low

Illuminated

—

C, D

B0004:55

Configuration setting error (driver-side knee air bag module structural malfunction)

Illuminated

—

C, D

(See DTC B0004:55 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

B0010:11

Passenger-side air bag module (inflator No.1) circuit short to body ground

Illuminated

—

C, D

(See DTC B0010:11, B0010:12, B0010:13, B0010:19 OR B0010:1A [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

B0010:12

Passenger-side air bag module (inflator No.1) circuit short to power supply

Illuminated

—

C, D

B0010:13

Passenger-side air bag module (inflator No.1) circuit open circuit or resistance high

Illuminated

—

C, D

B0010:19

Short circuit to passenger-side air bag module (inflator No.1) and other air bag module circuits

Illuminated

—

C, D

B0010:1A

Passenger-side air bag module (inflator No.1) circuit resistance low

Illuminated

—

C, D

B0010:55

Configuration setting error (passenger-side air bag module (inflator No.1) structural malfunction)

Illuminated

—

C, D

(See DTC B0001:55 OR B0010:55 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

[B0011:11]

Passenger-side air bag module (inflator No.2) circuit short to body ground

Illuminated

—

C, D

(See Inspection For DTCs Not Usually Displayed so The Related Function is Not Equipped.)

[B0011:12]

Passenger-side air bag module (inflator No.2) circuit short to power supply

Illuminated

—

C, D

[B0011:13]

Passenger-side air bag module (inflator No.2) circuit open circuit or resistance high

Illuminated

—

C, D

[B0011:19]

Short circuit to passenger-side air bag module (inflator No.2) and other air bag module circuits

Illuminated

—

C, D

[B0011:1A]

Passenger-side air bag module (inflator No.2) circuit resistance low

Illuminated

—

C, D

[B0011:55]

Configuration setting error (passenger-side air bag module (inflator No.2) structural malfunction)

Illuminated

—

C, D

[B0013:11]

Passenger-side knee air bag module circuit short to body ground

Illuminated

—

C, D

[B0013:12]

Passenger-side knee air bag module circuit short to power supply

Illuminated

—

C, D

[B0013:13]

Passenger-side knee air bag module circuit open circuit or resistance high

Illuminated

—

C, D

[B0013:19]

Short circuit to passenger-side knee air bag module and other air bag module circuits

Illuminated

—

C, D

[B0013:1A]

Passenger-side knee air bag module circuit resistance low

Illuminated

—

C, D

[B0013:55]

Configuration setting error (passenger-side knee air bag module structural malfunction)

Illuminated

—

C, D

[B0052:09]

Passenger-side buckle switch internal malfunction

Illuminated

—

C, D

[B0052:11]

Passenger-side buckle switch circuit open circuit or short to power supply

Illuminated

—

C, D

[B0052:14]

Passenger-side buckle switch circuit short to body ground

Illuminated

—

C, D

[B0094:11]

Crash zone sensor (center) circuit short to body ground or power supply

Illuminated

—

C, D

(See Inspection For DTCs Not Usually Displayed so The Related Function is Not Equipped.)

[B0094:13]

Crash zone sensor (center) circuit open circuit or short to power supply

Illuminated

—

C, D

[B0094:87]

Signal reception error from crash zone sensor (center)

Illuminated

—

C, D

[B0094:96]

Crash zone sensor (center) internal malfunction

Illuminated

—

C, D

[B0094:55]

Configuration setting error (crash zone sensor (center) structural malfunction)

Illuminated

—

C, D

[B0095:11]

Crash zone sensor (center) circuit short to body ground or power supply

Illuminated

—

C, D

[B0095:13]

Crash zone sensor (center) circuit open circuit or short to power supply

Illuminated

—

C, D

[B0095:87]

Signal reception error from crash zone sensor (center)

Illuminated

—

C, D

[B0095:96]

Crash zone sensor (center) internal malfunction

Illuminated

—

C, D

[B0095:55]

Configuration setting error (crash zone sensor (center) structural malfunction)

Illuminated

—

C, D

[B00A0:07]

Seat weight sensor control module mechanical malfunction

Illuminated

—

C, D

[B00A0:09]

Seat weight sensor control module signal output unstable

Illuminated

—

C, D

[B00A0:1C]

Seat weight sensor control module power supply circuit open

Illuminated

—

C, D

[B00A0:28]

Seat weight sensor control module calibration setting invalid

Illuminated

—

[B00A0:4A]

Seat weight sensor control module ID mismatch

Illuminated

—

C, D

[B00A0:54]

Seat weight sensor control module calibration error

Illuminated

—

C, D

[B00A0:81]

Seat weight sensor control module invalid serial data received

Illuminated

—

C, D

[B00A0:87]

No signal received from seat weight sensor control module

Illuminated

—

C, D

[B00A0:8F]

Seat weight sensor control module communication error

Illuminated

—

C, D

B00B5:11

Seat track position sensor circuit short to body ground

Illuminated

—

C, D

(See DTC B00B5:11, B00B5:12, B00B5:13 OR B00B5:1D [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

B00B5:12

Seat track position sensor circuit short to power supply

Illuminated

—

C, D

B00B5:13

Seat track position sensor circuit open

Illuminated

—

C, D

B00B5:1D

Seat track position sensor circuit current out of range

Illuminated

—

C, D

B00B5:55

Configuration setting error (seat track position sensor structural malfunction)

Illuminated

—

C, D

(See DTC B00B5:55 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

[B00C0:93]

Seat weight sensor (FL) malfunction

Illuminated

—

C, D

(See Inspection For DTCs Not Usually Displayed so The Related Function is Not Equipped.)

[B00C1:93]

Seat weight sensor (FR) malfunction

Illuminated

—

C, D

[B00C2:93]

Seat weight sensor (RL) malfunction

Illuminated

—

C, D

[B00C3:93]

Seat weight sensor (RR) malfunction

Illuminated

—

C, D

B00D2:01

Air bag system warning light malfunction

—

C, D

(See DTC B00D2:01 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

B00D2:29

Communication error with instrument cluster (air bag system warning light status mis-matched)

—

C, D

(See DTC B00D2:29 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

B00D5:01

PAD OFF indicator circuit open circuit or short to power supply

Illuminated

—

C, D

(See DTC B00D5:01 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

B00D5:29

Communication error with instrument cluster (PAD indicator light status mis-matched)

Illuminated

—

C, D

(See DTC B00D5:29 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

B1011:95

SAS control module connectors are poorly connected

Illuminated

—

C, D

(See DTC B1011:95 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

B10FD:11

Driver-side side air bag sensor circuit short to body ground or power supply

Illuminated

—

C, D

(See DTC B10FD:11, B10FD:13, B10FD:87 OR B10FD:96 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

B10FD:13

Driver-side side air bag sensor circuit open circuit or resistance high or short to power supply

Illuminated

—

C, D

B10FD:87

Signal reception error from driver-side side air bag sensor

Illuminated

—

C, D

B10FD:96

Driver-side side air bag sensor internal malfunction

Illuminated

—

C, D

B10FD:55

Configuration setting error (driver-side side air bag sensor structural malfunction)

Illuminated

—

C, D

(See DTC B10FD:55 OR B10FE:55 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

B10FE:11

Passenger-side side air bag sensor circuit short to body ground or power supply

Illuminated

—

C, D

(See DTC B10FE:11, B10FE:13, B10FE:87 OR B10FE:96 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

B10FE:13

Passenger-side side air bag sensor circuit open circuit or resistance high or short to power supply

Illuminated

—

C, D

B10FE:87

Signal reception error from passenger-side side air bag sensor

Illuminated

—

C, D

B10FE:96

Passenger-side side air bag sensor internal malfunction

Illuminated

—

C, D

B10FE:55

Configuration setting error (passenger-side side air bag sensor structural malfunction)

Illuminated

—

C, D

(See DTC B10FD:55 OR B10FE:55 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

B1126:11

Driver-side side air bag module circuit short to body ground

Illuminated

—

C, D

(See DTC B1126:11, B1126:12, B1126:13, B1126:19 OR B1126:1A [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

B1126:12

Driver-side side air bag module circuit short to power supply

Illuminated

—

C, D

B1126:13

Driver-side side air bag module circuit open circuit or resistance high

Illuminated

—

C, D

B1126:19

Short circuit to driver-side side air bag module and other air bag module circuits

Illuminated

—

C, D

B1126:1A

Driver-side side air bag module circuit resistance low

Illuminated

—

C, D

B1126:55

Configuration setting error (driver-side side air bag module structural malfunction)

Illuminated

—

C, D

(See DTC B1126:55 OR B1127:55 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

B1127:11

Passenger-side side air bag module circuit short to body ground

Illuminated

—

C, D

(See DTC B1127:11, B1127:12, B1127:13, B1127:19 OR B1127:1A [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

B1127:12

Passenger-side side air bag module circuit short to power supply

Illuminated

—

C, D

B1127:13

Passenger-side side air bag module circuit open circuit or resistance high

Illuminated

—

C, D

B1127:19

Short circuit to passenger-side side air bag module and other air bag module circuits

Illuminated

—

C, D

B1127:1A

Passenger-side side air bag module circuit resistance low

Illuminated

—

C, D

B1127:55

Configuration setting error (passenger-side side air bag module structural malfunction)

Illuminated

—

C, D

(See DTC B1126:55 OR B1127:55 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

B1128:11

Driver-side curtain air bag module circuit short to body ground

Illuminated

—

C, D

(See DTC B1128:11, B1128:12, B1128:13, B1128:19 OR B1128:1A [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

B1128:12

Driver-side curtain air bag module circuit short to power supply

Illuminated

—

C, D

B1128:13

Driver-side curtain air bag module circuit open circuit or resistance high

Illuminated

—

C, D

B1128:19

Short circuit to driver-side curtain air bag module and other air bag module circuits

Illuminated

—

C, D

B1128:1A

Driver-side curtain air bag module circuit resistance low

Illuminated

—

C, D

B1128:55

Configuration setting error (driver-side curtain air bag module structural malfunction)

Illuminated

—

C, D

(See DTC B1128:55 OR B1129:55 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

B1129:11

Passenger-side curtain air bag module circuit short to body ground

Illuminated

—

C, D

(See DTC B1129:11, B1129:12, B1129:13, B1129:19 OR B1129:1A [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

B1129:12

Passenger-side curtain air bag module circuit short to power supply

Illuminated

—

C, D

B1129:13

Passenger-side curtain air bag module circuit open circuit or resistance high

Illuminated

—

C, D

B1129:19

Short circuit to passenger-side curtain air bag module and other air bag module circuits

Illuminated

—

C, D

B1129:1A

Passenger-side curtain air bag module circuit resistance low

Illuminated

—

C, D

B1129:55

Configuration setting error (passenger-side curtain air bag module structural malfunction)

Illuminated

—

C, D

(See DTC B1128:55 OR B1129:55 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

B1193:00

SAS control module operation (deployment)

Illuminated

—

C, D

(See DTC B1193:00 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

[B1196:11]

Driver-side side air bag sensor No.2 circuit short to body ground or short to power supply

Illuminated

—

C, D

(See Inspection For DTCs Not Usually Displayed so The Related Function is Not Equipped.)

[B1196:13]

Driver-side side air bag sensor No.2 circuit open circuit or short to power supply

Illuminated

—

C, D

[B1196:55]

Configuration setting error (driver-side side air bag sensor No.2 structural malfunction)

Illuminated

—

C, D

[B1196:87]

Signal reception error from driver-side side air bag sensor No.2

Illuminated

—

C, D

[B1196:96]

Driver-side side air bag sensor No.2 internal malfunction

Illuminated

—

C, D

[B1197:11]

Passenger-side side air bag sensor No.2 circuit short to body ground or short to power supply

Illuminated

—

C, D

[B1197:13]

Passenger-side side air bag sensor No.2 circuit open circuit or short to power supply

Illuminated

—

C, D

[B1197:55]

Configuration setting error (passenger-side side air bag sensor No.2 structural malfunction)

Illuminated

—

C, D

[B1197:87]

Signal reception error from passenger-side side air bag sensor No.2

Illuminated

—

C, D

[B1197:96]

Passenger-side side air bag sensor No.2 internal malfunction

Illuminated

—

C, D

[B1202:01]

Passenger air bag deactivation (PAD) indicator malfunction

Illuminated

—

C, D

B1206:00

SAS control module collision judgment signal output (fuel cut signal output)

—

C, D

(See DTC B1206:00, B143A:00, B1A55:00 OR U2107:00 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

B1211:11

Driver-side front pre-tensioner seat belt circuit short to body ground

Illuminated

—

C, D

(See DTC B1211:11, B1211:12, B1211:13, B1211:19 OR B1211:1A [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

B1211:12

Driver-side front pre-tensioner seat belt circuit short to power supply

Illuminated

—

C, D

B1211:13

Driver-side front pre-tensioner seat belt circuit open circuit or resistance high

Illuminated

—

C, D

B1211:19

Short circuit to driver-side front pre-tensioner seat belt and other air bag module circuits

Illuminated

—

C, D

B1211:1A

Driver-side front pre-tensioner seat belt circuit resistance low

Illuminated

—

C, D

B1211:55

Configuration setting error (driver-side front pre-tensioner seat belt structural malfunction)

Illuminated

—

C, D

(See DTC B1211:55 OR B1214:55 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

B1212:00

Communication error with driver’s side buckle switch (no response or error data received)

Illuminated

—

C, D

(See DTC B1212:00 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

B1214:11

Passenger-side front pre-tensioner seat belt circuit short to body ground

Illuminated

—

C, D

(See DTC B1214:11, B1214:12, B1214:13, B1214:19 OR B1214:1A [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

B1214:12

Passenger-side front pre-tensioner seat belt circuit short to power supply

Illuminated

—

C, D

B1214:13

Passenger-side front pre-tensioner seat belt circuit open circuit or resistance high

Illuminated

—

C, D

B1214:19

Short circuit to passenger-side front pre-tensioner seat belt and other air bag module circuits

Illuminated

—

C, D

B1214:1A

Passenger-side front pre-tensioner seat belt circuit resistance low

Illuminated

—

C, D

B1214:55

Configuration setting error (passenger-side front pre-tensioner seat belt structural malfunction)

Illuminated

—

C, D

(See DTC B1211:55 OR B1214:55 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

B1226:11

Driver-side pressure sensor circuit short to body ground

Illuminated

—

C, D

(See DTC B1226:11, B1226:13, B1226:87 OR B1226:96 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

B1226:13

Driver-side pressure sensor circuit open circuit or short to power supply

Illuminated

—

C, D

B1226:87

Signal reception error from driver-side pressure sensor

Illuminated

—

C, D

B1226:96

Driver-side pressure sensor internal malfunction

Illuminated

—

C, D

B1226:55

Configuration setting error (driver-side pressure sensor structural malfunction)

Illuminated

—

C, D

(See DTC B1226:55 OR B1227:55 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

B1227:11

Passenger-side pressure sensor circuit short to body ground

Illuminated

—

C, D

(See DTC B1227:11, B1227:13, B1227:87 OR B1227:96 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

B1227:13

Passenger-side pressure sensor circuit open circuit or short to power supply

Illuminated

—

C, D

B1227:87

Signal reception error from passenger-side pressure sensor

Illuminated

—

C, D

B1227:96

Passenger-side pressure sensor internal malfunction

Illuminated

—

C, D

B1227:55

Configuration setting error (passenger-side pressure sensor structural malfunction)

Illuminated

—

C, D

(See DTC B1226:55 OR B1227:55 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

B1410:11

Driver-side rear pre-tensioner seat belt circuit short to body ground

Illuminated

—

C, D

(See DTC B1410:11, B1410:12, B1410:13, B1410:19 OR B1410:1A [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

B1410:12

Driver-side rear pre-tensioner seat belt circuit short to power supply

Illuminated

—

C, D

B1410:13

Driver-side rear pre-tensioner seat belt circuit open circuit or resistance high

Illuminated

—

C, D

B1410:19

Short circuit to driver-side rear pre-tensioner seat belt and other air bag module circuits

Illuminated

—

C, D

B1410:1A

Driver-side rear pre-tensioner seat belt circuit resistance low

Illuminated

—

C, D

B1410:55

Configuration setting error (driver-side rear pre-tensioner seat belt structural malfunction)

Illuminated

—

C, D

(See DTC B1410:55 OR B1412:55 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

B1412:11

Passenger-side rear pre-tensioner seat belt circuit short to body ground

Illuminated

—

C, D

(See DTC B1412:11, B1412:12, B1412:13, B1412:19 OR B1412:1A [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

B1412:12

Passenger-side rear pre-tensioner seat belt circuit short to power supply

Illuminated

—

C, D

B1412:13

Passenger-side rear pre-tensioner seat belt circuit open circuit or resistance high

Illuminated

—

C, D

B1412:19

Short circuit to passenger-side rear pre-tensioner seat belt and other air bag module circuits

Illuminated

—

C, D

B1412:1A

Passenger-side rear pre-tensioner seat belt circuit resistance low

Illuminated

—

C, D

B1412:55

Configuration setting error (passenger-side rear pre-tensioner seat belt structural malfunction)

Illuminated

—

C, D

(See DTC B1410:55 OR B1412:55 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

B1413:11

Driver-side crash zone sensor circuit short to body ground or power supply

Illuminated

—

C, D

(See DTC B1413:11, B1413:13, B1413:87 OR B1413:96 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

B1413:13

Driver-side crash zone sensor circuit open circuit or short to power supply

Illuminated

—

C, D

B1413:87

Signal reception error from driver-side crash zone sensor

Illuminated

—

C, D

B1413:96

Driver-side crash zone sensor internal malfunction

Illuminated

—

C, D

B1413:55

Configuration setting error (driver-side crash zone sensor structural malfunction)

Illuminated

—

C, D

(See DTC B1413:55 OR B1417:55 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

B1417:11

Passenger-side crash zone sensor circuit short to body ground or power supply

Illuminated

—

C, D

(See DTC B1417:11, B1417:13, B1417:87 OR B1417:96 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

B1417:13

Passenger-side crash zone sensor circuit open circuit or short to power supply

Illuminated

—

C, D

B1417:87

Signal reception error from passenger-side crash zone sensor

Illuminated

—

C, D

B1417:96

Passenger-side crash zone sensor internal malfunction

Illuminated

—

C, D

B1417:55

Configuration setting error (passenger-side crash zone sensor structural malfunction)

Illuminated

—

C, D

(See DTC B1413:55 OR B1417:55 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

B143A:00

SAS control module collision judgment signal output (collision detection signal output)

—

C, D

(See DTC B1206:00, B143A:00, B1A55:00 OR U2107:00 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

[B1500:11]

Driver-side far side air bag module circuit short to body ground

Illuminated

—

C, D

(See Inspection For DTCs Not Usually Displayed so The Related Function is Not Equipped.)

[B1500:12]

Driver-side far side air bag module circuit short to power supply

Illuminated

—

C, D

[B1500:13]

Driver-side far side air bag module circuit open circuit or resistance high

Illuminated

—

C, D

[B1500:19]

Short circuit to driver-side far side air bag module circuit and other air bag module circuits

Illuminated

—

C, D

[B1500:1A]

Driver-side far side air bag module circuit resistance low

Illuminated

—

C, D

[B1500:55]

Configuration setting error (driver-side far side air bag module structural malfunction)

Illuminated

—

C, D

[B1501:11]

Driver-side rear side air bag module circuit short to body ground

Illuminated

—

C, D

[B1501:12]

Driver-side rear side air bag module circuit short to power supply

Illuminated

—

C, D

[B1501:13]

Driver-side rear side air bag module circuit open circuit or resistance high

Illuminated

—

C, D

[B1501:19]

Short circuit to driver-side rear side air bag module circuit and other air bag module circuits

Illuminated

—

C, D

[B1501:1A]

Driver-side rear side air bag module circuit resistance low

Illuminated

—

C, D

[B1501:55]

Configuration setting error (driver-side rear side air bag module structural malfunction)

Illuminated

—

C, D

[B1502:11]

Passenger-side rear side air bag module circuit short to body ground

Illuminated

—

C, D

[B1502:12]

Passenger-side rear side air bag module circuit short to power supply

Illuminated

—

C, D

[B1502:13]

Passenger-side rear side air bag module circuit open circuit or resistance high

Illuminated

—

C, D

[B1502:19]

Short circuit to passenger-side rear side air bag module circuit and other air bag module circuits

Illuminated

—

C, D

[B1502:1A]

Passenger-side rear side air bag module circuit resistance low

Illuminated

—

C, D

[B1502:55]

Configuration setting error (passenger-side rear side air bag module structural malfunction)

Illuminated

—

C, D

B1A55:00

SAS control module collision judgment signal output (collision detection signal output)

—

C, D

(See DTC B1206:00, B143A:00, B1A55:00 OR U2107:00 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

B1D75:55

Configuration setting error (passenger air bag deactivation switch structural malfunction)

Illuminated

—

C, D

(See DTC B1D75:55 OR B1D75:62 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

B1D75:62

Passenger air bag deactivation switch circuit open circuit or short to body ground

Illuminated

—

C, D

C0061:29

Low-G sensor (lateral-G) in SAS control module (internal circuit disabled)

—

C, D

(See DTC C0061:29, C0062:29, C0063:29 OR P0666:29 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

C0062:29

Low-G sensor (forward-G) in SAS control module (internal circuit disabled)

—

C, D

C0063:29

Yaw rate sensor in SAS control module (internal circuit disabled)

—

C, D

P0666:29

Temperature sensor in SAS control module (internal circuit disabled)

—

C, D

P160A:00

Configuration data unmatched with body control module (BCM)

Illuminated

—

C, D

(See DTC P160A:00 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

U0001:88

Unit communication error (HS-CAN)

Illuminated

—

C, D

(See DTC U0001:88 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

U0140:00

Communication error with body control module (BCM)

Illuminated

—

C, D

(See DTC U0140:00 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

U0155:00

Communication error with instrument cluster

Illuminated

—

C, D

(See DTC U0155:00 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

U0155:41

Communication error with instrument cluster (check sum error)

Illuminated

—

C, D

(See DTC U0155:41 OR U0155:82 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

U0155:82

Communication error with instrument cluster (counter error)

Illuminated

—

C, D

U0156:00

Communication error with instrument cluster

Illuminated

—

C, D

(See DTC U0156:00 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

U0156:41

Communication error with instrument cluster (check sum error)

Illuminated

—

C, D

(See DTC U0156:41 OR U0156:82 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

U0156:82

Communication error with instrument cluster (counter error)

Illuminated

—

C, D

U0300:00

Configuration setting invalid

Illuminated

—

C, D

(See DTC U0300:00 OR U2100:00 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

U2005:68

PCM communication error (vehicle speed signal)

Illuminated

—

C, D

(See DTC U2005:68 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

U2100:00

Configuration not set

Flash

—

C, D

(See DTC U0300:00 OR U2100:00 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

U2107:00

SAS control module collision judgment signal output (secondary collision reduction request signal output)

—

C, D

(See DTC B1206:00, B143A:00, B1A55:00 OR U2107:00 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

U3000:49

SAS control module internal malfunction

Illuminated

—

C, D

(See DTC U3000:49 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

U3003:16

SAS control module power supply voltage decreases (8 V or less)

Illuminated

—

C, D

(See DTC U3003:16 OR U3003:17 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

U3003:17

SAS control module power supply voltage increases (18 V or more)

Illuminated

—

C, D

Step	Inspection	Results	Action
1	INSPECT FOR ANY DTC DISPLAYED SIMULTANEOUSLY • Is any DTC not within [ ] in the DTC table displayed simultaneously?	Yes	Repair the malfunctioning part according to the applicable DTC troubleshooting. (See DTC TABLE [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
No	Go to the next step.
2	PERFORM SAS CONTROL MODULE DTC INSPECTION • Perform the on-demand self test. (See DTC INSPECTION.) • Are the same DTCs displayed?	Yes	Go to the next step.
No	If DTC is displayed • Repair the malfunctioning part according to the applicable DTC troubleshooting. (See DTC TABLE [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].) If DTC is not displayed • DTC troubleshooting completed.
3	PERFORM SAS CONTROL MODULE CONFIGURATION • Perform the SAS control module configuration using the M-MDS. (See CONFIGURATION.) • Clear the DTC for the SAS control module using the M-MDS. (See CLEARING DTC.) • Perform the DTC inspection for the SAS control module using the M-MDS. (See DTC INSPECTION.) • Are the same DTCs displayed?	Yes	Perform the repair completion verification.
No	If DTC is displayed • Repair the malfunctioning part according to the applicable DTC troubleshooting. (See DTC TABLE [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].) If DTC is not displayed • DTC troubleshooting completed.
Repair completion verification	PERFORM SAS CONTROL MODULE DTC INSPECTION • Clear the DTC for the SAS control module using the M-MDS. (See CLEARING DTC.) • Perform the DTC inspection for the SAS control module using the M-MDS. (See DTC INSPECTION.) • Are the same DTCs displayed?	Yes	Repeat the inspection from Step 2. • If the malfunction recurs, replace the SAS control module. (See SAS CONTROL MODULE REMOVAL/INSTALLATION [STANDARD DEPLOYMENT CONTROL SYSTEM].) (See SAS CONTROL MODULE REMOVAL/INSTALLATION [TWO-STEP DEPLOYMENT CONTROL SYSTEM].)
No	If DTC is displayed • Repair the malfunctioning part according to the applicable DTC troubleshooting. (See DTC TABLE [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].) If DTC is not displayed • DTC troubleshooting completed.

Step

Inspection

Results

Action

INSPECT FOR ANY DTC DISPLAYED SIMULTANEOUSLY

• Is any DTC not within [ ] in the DTC table displayed simultaneously?

Yes

Repair the malfunctioning part according to the applicable DTC troubleshooting.

(See DTC TABLE [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

Go to the next step.

PERFORM SAS CONTROL MODULE DTC INSPECTION

• Perform the on-demand self test.